RS Autohaus Guards Red 991.2 GT3 RS BBi Roll Bar & Sparco Seat Install Track Prep
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
RS Autohaus Guards Red 991.2 GT3 RS BBi Roll Bar & Sparco Seat Install Track Prep
Attachment 1344394
RS Autohaus Guards Red 991.2 GT3 RS BBi Autosport Roll Bar & Sparco Sparco PRO 2000 II Racing Seat Install Track Prep
Our friends over at RS Autohaus in Oklahoma installed our BBi Street Cup Roll Bar in their newly delivered Porsche 991.2 GT3 RS shop car to provide additional protection and mounting locations for racing harnesses. To provide proper restraint and support, RS Autohaus installed Sparco PRO 2000 II FIA Certified racing seats mounted on our BBi Seat Base Kit. We are proud to have RS Autohaus as one of our premier dealers in the country, representing our complete line of performance and safety upgrades. Here are some detailed pictures of the installation process that we would like to share below.
BBi Autosport Porsche 991 GT3 StreetCup Bolt-In Roll Bar
Features
BBi Roll Bar Installed
Sparco Pro 2000 II Racing Seat
BBi Autosport Seat Base Kit
Completed Installation
About RS Autohaus
Address:
12804 S Memorial Dr #111
Bixby, OK 74008
Phone:
(918) 970-4112
E-mail:
sales@rsautohaus.com
- Jerry@BBiAutosport.com
RS Autohaus Guards Red 991.2 GT3 RS BBi Autosport Roll Bar & Sparco Sparco PRO 2000 II Racing Seat Install Track Prep
Our friends over at RS Autohaus in Oklahoma installed our BBi Street Cup Roll Bar in their newly delivered Porsche 991.2 GT3 RS shop car to provide additional protection and mounting locations for racing harnesses. To provide proper restraint and support, RS Autohaus installed Sparco PRO 2000 II FIA Certified racing seats mounted on our BBi Seat Base Kit. We are proud to have RS Autohaus as one of our premier dealers in the country, representing our complete line of performance and safety upgrades. Here are some detailed pictures of the installation process that we would like to share below.
BBi Autosport Porsche 991 GT3 StreetCup Bolt-In Roll Bar
Features
- 1.75” x 0.095”, 1.5” x 0.083” high strength seamless tubing (DOM) utilized for excellent strength to weight ratio
- TIG welded and utilizes “X” braces on front and rear sections for superior strength and rigidity
- Mounts to frame structure (utilizing factory bolts) to provide strongest mounting points and maximum protection
- Utilizes laser cut mounting plates & inner diameter tube clamps that are CNC turned and milled for a precise fit
- Designed to work with stock seats or any aftermarket seats on the market
- Allows full seat travel to accommodate taller drivers
- Can be used with stock seat belts or 6 point harnesses for track use
- Designed to work with wrap-around style harnesses while optional eyelet bolt provisions are available for clip-in harnesses
- OEM fit & finish. The main hoop contours entire arch of the roof with an even 3/16 inch gap
- Finished in satin black powder coat. Other colors available Bolt-in installation requires no drilling and minimal carpet trimming
- Made in USA
BBi Roll Bar Installed
Sparco Pro 2000 II Racing Seat
BBi Autosport Seat Base Kit
Completed Installation
About RS Autohaus
Address:
12804 S Memorial Dr #111
Bixby, OK 74008
Phone:
(918) 970-4112
E-mail:
sales@rsautohaus.com
- Jerry@BBiAutosport.com
__________________
Bringing Passion, Artistry, Craft to the Porsche Tuning Industry
Southern California's Porsche Performance Tuning, Engine Development,
ECU Software Tuning, Custom Fabrication, Race Preparation & Factory Service Center
Website: www.bbiautosport.com Email: sales@bbiautosport.com Phone: (714) 843-0200
Follow Us On: Facebook & Instagram
Bringing Passion, Artistry, Craft to the Porsche Tuning Industry
Southern California's Porsche Performance Tuning, Engine Development,
ECU Software Tuning, Custom Fabrication, Race Preparation & Factory Service Center
Website: www.bbiautosport.com Email: sales@bbiautosport.com Phone: (714) 843-0200
Follow Us On: Facebook & Instagram