GT2 RS carbon bits for the 3RS
02-11-2019, 05:06 PM
#138
Racer
Any further questions, advice needed or looking for an offer - call or PM us.
02-11-2019, 05:25 PM
#139
https://rennlist.com/forums/991-gt3-...come-in-7.html
any interest in developing a similar product for those RS owners who prefer a more subdued look? It’s basically a set of end caps to be installed in lieu of the rear wing uprights. See last few pages of the above link
any interest in developing a similar product for those RS owners who prefer a more subdued look? It’s basically a set of end caps to be installed in lieu of the rear wing uprights. See last few pages of the above link
02-11-2019, 05:50 PM
#140
Racer
https://rennlist.com/forums/991-gt3-...come-in-7.html
any interest in developing a similar product for those RS owners who prefer a more subdued look? It’s basically a set of end caps to be installed in lieu of the rear wing uprights. See last few pages of the above link
any interest in developing a similar product for those RS owners who prefer a more subdued look? It’s basically a set of end caps to be installed in lieu of the rear wing uprights. See last few pages of the above link
02-11-2019, 07:03 PM
#141
Race Director
DB -- what do you think about the new Chinese made carbon parts Porsche is using for the 2RS? Some have posted some quality concerns.
Is this a new vendor they're using? The 992 also switched up its interior trim which looks went the cost cutting bean counter route.
Is this a new vendor they're using? The 992 also switched up its interior trim which looks went the cost cutting bean counter route.
02-11-2019, 11:07 PM
#142
RL Community Team
Rennlist Member
Rennlist Member
The same carbon parts from China were used on the 918, and maybe earlier.
In fact, currently, some of the finest carbon parts are made in China.
02-11-2019, 11:27 PM
#143
Race Director
Originally Posted by ipse dixit
There's nothing new about them.
The same carbon parts from China were used on the 918, and maybe earlier.
In fact, currently, some of the finest carbon parts are made in China.
The same carbon parts from China were used on the 918, and maybe earlier.
In fact, currently, some of the finest carbon parts are made in China.
Good to know. Porsche should start assembling cars there.
Designed in Germany / Made in China
Where is a Ferrari carbon made BTW?
02-12-2019, 03:20 AM
#144
Racer
Agreed.
The aftermarket parts are all rubbish, 95% comes from the Asia market are that... but there are some industrial companies received the know how from US and European companies and in fact produce highest quality stabil carbon parts - so for the new RS models/Weissach packages. Getting closer to our quality standards ;-)
The aftermarket parts are all rubbish, 95% comes from the Asia market are that... but there are some industrial companies received the know how from US and European companies and in fact produce highest quality stabil carbon parts - so for the new RS models/Weissach packages. Getting closer to our quality standards ;-)
03-09-2019, 08:54 PM
#147
AutoX
Anyone else have difficulty removing the front fender vents especially on the passenger side with the gas tank lid??
Any tips to on how to remove without taking off the fender?
Any tips to on how to remove without taking off the fender?
03-20-2019, 01:55 AM
#148
Rennlist Member
Agreed.
The aftermarket parts are all rubbish, 95% comes from the Asia market are that... but there are some industrial companies received the know how from US and European companies and in fact produce highest quality stabil carbon parts - so for the new RS models/Weissach packages. Getting closer to our quality standards ;-)
The aftermarket parts are all rubbish, 95% comes from the Asia market are that... but there are some industrial companies received the know how from US and European companies and in fact produce highest quality stabil carbon parts - so for the new RS models/Weissach packages. Getting closer to our quality standards ;-)
Before you ask, no the car was not kept in the sun, only when driving somewhere or parked then stored in a garage when not in use.
What kind of warranty and resistance to UV/sun should we expect from these exterior CF replacement parts?
Thank you.
03-20-2019, 04:42 AM
#149
Racer
We provide an lifetime warranty on our products, unique on the market!
Check out our website for details:
DB Carbon lifetime warranty
We´ve over the years developed our complete own way of manufacturing, which allows us to provide such warranty. Wherever our products are placed in any climatic area around the world, heated up or standing months in the direct sunlight - our products will stay strong and just as the day they were delivered.
We do our work in german handwork with passion and under highest quality standards - just brilliant clear black & flawless quality made for lifetime, count on our word!
Any questions or support needed, just give us an call or mail please.
Check out our website for details:
DB Carbon lifetime warranty
We´ve over the years developed our complete own way of manufacturing, which allows us to provide such warranty. Wherever our products are placed in any climatic area around the world, heated up or standing months in the direct sunlight - our products will stay strong and just as the day they were delivered.
We do our work in german handwork with passion and under highest quality standards - just brilliant clear black & flawless quality made for lifetime, count on our word!
Any questions or support needed, just give us an call or mail please.
03-20-2019, 01:57 PM
#150
Drifting
That´s correct Peter, same as OEM carbon parts on the interior and most of the exterior our products are OEM base parts with real carbon - manufactured in Germany under highest quality standards in flawless perfection.
Weight stays the same and an upgrade is ever an question of each personal taste.
Weight stays the same and an upgrade is ever an question of each personal taste.
Your parts are OEM parts that are then wrapped in carbon fiber? Or are they 100% new carbon fiber parts?
If they are simply OEM plastic parts with a carbon fiber wrap around them, how can they possibly be the same weight? You are adding material to the existing parts. That means they MUST weigh more.