Jon70

Are the PET for the 991.2 GT3 RS and 991 GT2 RS available anywhere online? I can find the 991.1 RS, but nothing newer.

Thanks for any help.

Loess

I have the v-pages for the 991 GT3 2014+. It references the new DGGB engine and even has reference to the GT Speedster. The file is too large to email though.

Are you looking for a specific part number?

Jon70

Just curious on if the wing element on the cars are identical

Loess

It looks like both the wing and the end plates are different.

Jon70

Thanks, is that the 991.2 GT3 RS?

Loess

Yes that is the .2RS. It has the 2 risers on the struts.

The 2016 wing is 991 512 265 95
The 2019 wing is 991 512 265 98

A/S

No, they are not. I checked them side by side. My 991.1 RS wing has 2 positions, the 991.2 RS wing has 3 or 4 positions. The end plates are different too. The uprights seem to be the same for both cars.

Talking wings, who knows which GT3 Cup or GT3 R or RSR wings can bolt to a stock 991.1 GT3 RS decklid?

Jon70

I knew the .1 and .2 wings are different. I was trying to figure out if the .2 GT3 RS and GT2 RS wings are different. Actually, the uprights on the .1 and .2 RS are different. Besides the lack of a central beam, the .2 uprights are taller than the .1.

Loess

The GT2 wing is a different part number as well: 991 512 265 70
It appears the struts are the same part for the .2 RS's.

I found a link to the parts book on line. The GT2 parts are shown in the latest Turbo parts book.

https://www.porsche.com/usa/accessor...originalparts/

signes

The end plates are also different for all three (.1 and .2 3RS, and 2RS)

A/S

Thanks for the link.

Wow even the trunk lid is different, uprights, side plates, wing, over $20,000 on parts.

Yes, it shows the same uprights for the GT2RS and 991.2 GT3RS, different wings and different end plates.

TRAKCAR

PhilT3 (PT3)

Jon70

Waxer