Braking the GT2RS
#1
Braking the GT2RS
Best way to wipe off all the extra speed you carry in the GT2RS
Step 1: Visit Mov’it Germany for calipers
Step 2: Visit Autoquest for the Surface Transforms rotors
Step 3: Remove these
Step 4: Install these
Step 5: Then install these
Step 6: Road test
Step 7: Go have some fun on the track and outbrake the competition....
Step 1: Visit Mov’it Germany for calipers
Step 2: Visit Autoquest for the Surface Transforms rotors
Step 3: Remove these
Step 4: Install these
Step 5: Then install these
Step 6: Road test
Step 7: Go have some fun on the track and outbrake the competition....
Last edited by Slip; 08-09-2018 at 08:28 AM.
#2
Beautiful car and color. Would you mind sharing the cost of the calipers and rotors?
#3
The Mov’it guys can be contacted at this link and will be able to help you with pricing for the calipers: Mov’it website
Note it’s the same replacement kit from Mov’it for the OEM PCCB sizing installed on the 991 GT3RS and GT2RS
#5
#7
Race Car
Trending Topics
#10
Race Car
#11
#12
Note the post is a few years old and the US distributor for the rotors is now Autoquest. The information is still relevant.
#13
Now that's a brake set up! Refurbishable ST CCM rotors mated to solid calipers...sweet!
#14
Addict
Rennlist Member
Rennlist Member
The AP Calipers are not compatible with the ST rotors - wrong sizes. The iron rotors that the AP kit uses are quite light though (whole system almost as light as PCCB without the replacement cost). Not sure the weight of Movit & ST setup....
#15
Addict
Rennlist Member
Rennlist Member