More GRP Bypasses Shipping Out!
#17
Opened my email today and found this note.........tough decision time---> do I go ahead and remove the rear bumper/stock center exhaust so I am ready for a quick install or try to do it from underneath once the package arrives........
#19
Drifting
Can this bypass section twist or rotate at all once installed?
#20
Hot off the press, more GRP center sections shipping out. Notice the longer tips for the 991.2 GT3!
We are working hard w/ BBi to build up more inventory and get lots stocked on the shelves because thanks to many of you these have been selling like crazy. We really appreciate your support, and look forward to working with some more of you very soon!
We are working hard w/ BBi to build up more inventory and get lots stocked on the shelves because thanks to many of you these have been selling like crazy. We really appreciate your support, and look forward to working with some more of you very soon!
#21
Race Director
Bumper does not need to be removed to install the Bypass
#22
Platinum Dealership
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Yes! That’s the beauty of it. When the clamps are slightly loose you can adjust top angle, so make it look like you want! Then, when you want tighten it up and boom it will never move. We have thousands of miles on these, and never one issue!
#23
Race Car
All depends if you can get to the clamp bolts. Mine were in the wrong spot so no can do. Had to remove the bumper cover which took an incremental 15 minutes. Just about as easy as it gets and then makes the rest so nice and spacious.
#24
Platinum Dealership
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
#25
When I was restoring early Broncos, if someone decided to install a lift or rollbar, they would buy a case of beer and invite anyone on the forum who was bored to come over and help. Surprisingly, even with a group of random internet strangers, I recall that people always came and helped. So Rennlisters.....I will soon be installing a GRP bypass and would like to take the bumper off to do it (but I only have two hands and don't want to drop the bumper in the process). If anyone is near east central MS when it arrives, I have beer.
#26
Race Car
When I was restoring early Broncos, if someone decided to install a lift or rollbar, they would buy a case of beer and invite anyone on the forum who was bored to come over and help. Surprisingly, even with a group of random internet strangers, I recall that people always came and helped. So Rennlisters.....I will soon be installing a GRP bypass and would like to take the bumper off to do it (but I only have two hands and don't want to drop the bumper in the process). If anyone is near east central MS when it arrives, I have beer.
#27
Drifting
You can do it up in titanium? Any idea what the weight savings would be compared to the stainless version and compared to stock? The stock section is what, 20lbs?
#28
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
__________________
Bringing Passion, Artistry, Craft to the Porsche Tuning Industry
Southern California's Porsche Performance Tuning, Engine Development,
ECU Software Tuning, Custom Fabrication, Race Preparation & Factory Service Center
Website: www.bbiautosport.com Email: sales@bbiautosport.com Phone: (714) 843-0200
Follow Us On: Facebook & Instagram
Bringing Passion, Artistry, Craft to the Porsche Tuning Industry
Southern California's Porsche Performance Tuning, Engine Development,
ECU Software Tuning, Custom Fabrication, Race Preparation & Factory Service Center
Website: www.bbiautosport.com Email: sales@bbiautosport.com Phone: (714) 843-0200
Follow Us On: Facebook & Instagram
#29
Platinum Dealership
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
More GRP center bypasses were etched and shipped this afternoon! Excited to get these in customers hands, as well as new dealership partners that will be stocking our systems!
call us today to order yours, or check out our website. These are definitely selling as fast as we can make them!
#30
More GRP center bypasses were etched and shipped this afternoon! Excited to get these in customers hands, as well as new dealership partners that will be stocking our systems!
call us today to order yours, or check out our website. These are definitely selling as fast as we can make them!