.2 Passenger Cushion Passthrough
 

Has anyone been successful in modifying the passenger side cushion to allow the passthrough of the sub belt?

Why, Porsche???? Why?

1) Been done on the .1. Search
2) DOT requirement. Search
3) Some PCA regions will not allow it - 4 pt. Search

Just had mine modified last week. Just remove the cushion and send to a shop that makes seat covers and has sewing machine.

.1 cushion is different... don't think it had a hole like this on the driver side... https://cimg0.ibsrv.net/gimg/rennlis...65e672d014.jpg

and why would DOT allow driver side passthrough and not Passenger? Wouldn't it be all or nothing? Does clubsport option (where allowed) provide passenger passthrough?

Do you mind DM me the contact Info on who did It? Are you happy with the results?

Thanks!

passenger seat has an air bag weight sensor. Not required on the drivers side.

true. Didn't interfere on the .1. Maybe that is why they excluded... liability?

Good to know. My dealer offered to cut the hole and reupholster the passenger seat. Wonder if they reposition the weight sensor, or they just remove it?

Didn't have to do anything on sensor itself in the .1. Just re-position the electronic component under the seat. This was previously documented here (think on OrthoJoe's thread).

I'll contact my dealer to see if they have a source they trust.

The pass thru hole is front of the sensor did it myself this past weekend no big deal , had local upholster shop put a stitch in on either side of the hole good go, use the driver side pass thru hole in carbon fiber to make template then use on passenger side
also need to get sub mount for harness not a big deal


https://rennlist.com/forums/webkit-f...bc68/imagejpeghttps://rennlist.com/forums/webkit-f...3cc6/imagejpeghttps://rennlist.com/forums/webkit-f...9e09/imagejpeg

We also send our cushion out to a trusted local upholster to have them modified.

https://cimg1.ibsrv.net/gimg/rennlis...72e2f2fb1f.jpg

Finding a local trusted upholster is the key...

really not that big of a deal
pm if you have questions happy to have a phone conversation , I added the pass thru seat cushion and cf seat , plus installed sub bar mounts ( Cantrell) seat angle adjusters from auto quest and gmg rsr harness bar in 6 plus so hours w many breaks this past weekend. IMHO your over thinking this

i have pics that I tried to upload but for some reason it’s not working

Thank you. Just want to make sure I don't screw up the seat cushions by cutting the seam open when I shouldn't.

I have a lead on a few good upholstery shops now so I'll pull the cushion off tomorrow and give it to one of them to have it done.

How did you make out ?