Glistening Perfection Group Buy
#46
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Grant P's 991 Turbo - Update
New windshield and various parts for front bumper arrived from Porsche
Some photos from body shop
Some photos from body shop
__________________
Specializing in Porsche/Ferrari since 1995
Why choose GP...WATCH OUR DOCUMENTARY
Follow Moe HERE
GP Fastrak - Ceramic/PPF/Tint in one simple bundle - Click Here for more info
Specializing in Porsche/Ferrari since 1995
Why choose GP...WATCH OUR DOCUMENTARY
Follow Moe HERE
GP Fastrak - Ceramic/PPF/Tint in one simple bundle - Click Here for more info
Last edited by MoeMistry; 12-04-2017 at 07:28 PM.
#47
Moe,
My new 2018 GT3.2 which is GT Silver is scheduled to deliver here in Massachusetts on Jan 26th. Can you recommend anyone out here that you know can take good care of me?
Your work looks awesome!
Thank you,
Jerry
My new 2018 GT3.2 which is GT Silver is scheduled to deliver here in Massachusetts on Jan 26th. Can you recommend anyone out here that you know can take good care of me?
Your work looks awesome!
Thank you,
Jerry
#48
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
http://cquartz.com/find-your-finest/
#50
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Headlight delamination question
I was recently asked my position on applying film over headlights. As many of you that are our client already know, we highly recommend it.
here’s a neat thread on some more info:
here’s a neat thread on some more info:
#54
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
UPDATE - RUF RS's 991.2 GT3
Tinting complete. We chose Huper Optik Ceramic 60 all around
Much-needed paint correction was performed
Factory sanding marks on various areas throughout the exterior paint
Factory sanding marks on rear wing
Paint correction complete and getting her first bath after surgery
Clear bra process begins
Side rockers protected the entire length of rocker
Second impact piece, a smaller one, to further protect against rock chips
Both pieces aligned perfectly for one seam appearance
Much-needed paint correction was performed
Factory sanding marks on various areas throughout the exterior paint
Factory sanding marks on rear wing
Paint correction complete and getting her first bath after surgery
Clear bra process begins
Side rockers protected the entire length of rocker
Second impact piece, a smaller one, to further protect against rock chips
Both pieces aligned perfectly for one seam appearance
#55
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
UPDATE - Grant P's 991 Turbo
Back from body shop and front end looking amazing
New windshield replaced
Windows tinted with Huper Optik Ceramic 60
New windshield replaced
Windows tinted with Huper Optik Ceramic 60
#56
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
UPDATE - Gasol 1's 991.2 Carrera 4
Paint correction took several days, but results were amazing
Whenever we have issues with water spots, we do a pre-test prior to nano application to assure the imperfections have been eliminated. This pretest requires heating the affected areas to 125 degrees for about 5 minutes using an IR curing lamp
Unfortunately, the paint did not pass the pre-test. The clear coat has "memory" and once heated to temp, the deep water spots that have been etched in, re-appeared.
To truly eliminate them, we must sand the paint and get to healthy and unaffected clear coat. This approach is a roll of the dice, and you must sand, compound/polish, re-test, and keep doing this until the spots no longer appear. Alternative approach that does not require sanding, is to apply clear bra.
We polished the paint again, put clear bra sample, and tested the area to see if spots will appear UNDER the clear bra. After heating the panel several times at higher temperature for longer time, basically an extreme test, we resolved the issue.
The area that has clear bra was un-affected. This assures us that even though we cannot truly make the actual paint perfect, we can apply clear bra to entire vehicle, basically putting a blanket on the giant and keeping it asleep.
In great company
Whenever we have issues with water spots, we do a pre-test prior to nano application to assure the imperfections have been eliminated. This pretest requires heating the affected areas to 125 degrees for about 5 minutes using an IR curing lamp
Unfortunately, the paint did not pass the pre-test. The clear coat has "memory" and once heated to temp, the deep water spots that have been etched in, re-appeared.
To truly eliminate them, we must sand the paint and get to healthy and unaffected clear coat. This approach is a roll of the dice, and you must sand, compound/polish, re-test, and keep doing this until the spots no longer appear. Alternative approach that does not require sanding, is to apply clear bra.
We polished the paint again, put clear bra sample, and tested the area to see if spots will appear UNDER the clear bra. After heating the panel several times at higher temperature for longer time, basically an extreme test, we resolved the issue.
The area that has clear bra was un-affected. This assures us that even though we cannot truly make the actual paint perfect, we can apply clear bra to entire vehicle, basically putting a blanket on the giant and keeping it asleep.
In great company
#57
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
unlimitedlimeper's 911 Carrera
We love older 911s because the transformation is even more dramatic.
Initial wash of decades of grime
Wheels and wheel wells deep cleaned, polished, and nanod
Windows tinted using Huper Optikc Ceramic 40 and 60
Dis-assembly to begin preparing for the clear bra installation from the mirrors back
Paint correction
Initial wash of decades of grime
Wheels and wheel wells deep cleaned, polished, and nanod
Windows tinted using Huper Optikc Ceramic 40 and 60
Dis-assembly to begin preparing for the clear bra installation from the mirrors back
Paint correction
#58
Burning Brakes
Thread Starter
WOW WOW Just AMAZING...can't WAIT to pick her up!!!
#59
Race Car
I stopped by yesterday and these projects are just amazing. Pics don’t do them justice. Truly awesome work Moe.
#60
Burning Brakes
Thread Starter
Group Buy Update
AS of 12/20, see the UPDATED and CURRENT list for the GP Group Buy. On another note, I'm picking up my MB GT3.2 tomorrow...
QUOTE=RUF RS;14597043]Many of you are probably familiar with Moe @ Glistening Perfection, as well as the superb quality of his work. I was lucky enough to be part of a 'GROUP BUY' on my 2014 GT3.1....AND, since I am about take delivery of my (Miami Blue) .2, I thought I would start a thread, and try to get a group buy going (with discount) for our GT3.2's.
I can't give details of the exact discount, but it is well worth signing up for! If you are in So. Cal, and thinking about pricing for clear bra, tinting, nano coating and hardware installation,I promise it is WELL WORTH contacting Moe, and/or getting on the list for a group buy discount on our GT3.2's.
If you're interested, please add your name to the below group buy list.
Here's a link to Moe's web site, and NOTE: he SPECIALIZES in Porsche....
http://www.glisteningperfection.com
Go ahead and add your name to the thread if interested, and/or shoot a PM or email to Moe!
1. RUF RS
2. Brandon G
3. Evan H.
4.Gasol1
5. Grant P - PORSCHE
6. Goin2drt
7. Hayn911gt3
8. Grant P - Audi
9. Goofballdeluxe
10.Steve 77 930
11.unlimitedlimeper[/QUOTE]
QUOTE=RUF RS;14597043]Many of you are probably familiar with Moe @ Glistening Perfection, as well as the superb quality of his work. I was lucky enough to be part of a 'GROUP BUY' on my 2014 GT3.1....AND, since I am about take delivery of my (Miami Blue) .2, I thought I would start a thread, and try to get a group buy going (with discount) for our GT3.2's.
I can't give details of the exact discount, but it is well worth signing up for! If you are in So. Cal, and thinking about pricing for clear bra, tinting, nano coating and hardware installation,I promise it is WELL WORTH contacting Moe, and/or getting on the list for a group buy discount on our GT3.2's.
If you're interested, please add your name to the below group buy list.
Here's a link to Moe's web site, and NOTE: he SPECIALIZES in Porsche....
http://www.glisteningperfection.com
Go ahead and add your name to the thread if interested, and/or shoot a PM or email to Moe!
1. RUF RS
2. Brandon G
3. Evan H.
4.Gasol1
5. Grant P - PORSCHE
6. Goin2drt
7. Hayn911gt3
8. Grant P - Audi
9. Goofballdeluxe
10.Steve 77 930
11.unlimitedlimeper[/QUOTE]
Last edited by RUF RS; 12-20-2017 at 01:35 PM.