Fabspeed Motorsport | 981 Boxster/Cayman Tracktec Valved Exhaust System
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Join Date: Mar 2017
Location: Philadelphia, Pennsylvania
Posts: 2,449
Received 676 Likes
on
430 Posts
Fabspeed Motorsport | 981 Boxster/Cayman Tracktec Valved Exhaust System
Hey guys! Scott here from Fabspeed Motorsport wanted to profile our 981 Boxster/Cayman TrackTec Valved Bypass Exhaust System. I've had quite a few inquires lately for this system, so here she is!
Our esteemed sporty Maxflo Exhaust tone with a raw, race car roar and extra power at the press of a button thanks to muffler bypass valves. One exhaust, two unique tones.
Fabspeed engineers are always tinkering, and we wanted to try something a little different. We incorporated muffler bypass valves into the inlet pipes of our Maxflo Exhaust system to unleash an additional raw, race car like tone at the press of a button. The prototype system received an abundance of attention, a positive response, and power was picked up; we're proud to offer the unique TrackTec Valved Bypass Exhaust for those looking for something special.
With valves closed, the familiar sporty, refined tone of the Maxflo mufflers offers a pleasing level of sound with no droning. With one press of the factory Sport button or Fabspeed valve remote, exhaust is free to travel unrestricted through 48mm dump tubes bypassing the mufflers. A frenzy of burbling and crackling erupts with every application of the throttle. A thunderous roar permeates the cabin at just the right volume level. Turn up the volume and turn heads to the tune of an increase of around 15whp and 19ft-lbs of torque at 4000RPM.
Fits all Porsche 981 Boxster/Cayman vehicles (2013-2016)
Includes Deluxe Dual-Style Tips in your choice of finish
Improves horsepower and torque by around 15 whp and 19 ft-lbs at 4000 RPM
Saves 6 lbs from the rear of the vehicle compared to the full OEM exhaust system
Does not trigger Check Engine Light
Constructed from high quality 14-16ga CNC mandrel-bent T304 stainless steel for maximum performance and durability
Noticeable improvement in sports car sound and throttle response
Direct replacement for the OEM muffler with no cutting or welding required
All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty
>>>>
<<<<
Take a look at the system, and feel free to reach out for forum pricing!!
Our esteemed sporty Maxflo Exhaust tone with a raw, race car roar and extra power at the press of a button thanks to muffler bypass valves. One exhaust, two unique tones.
Fabspeed engineers are always tinkering, and we wanted to try something a little different. We incorporated muffler bypass valves into the inlet pipes of our Maxflo Exhaust system to unleash an additional raw, race car like tone at the press of a button. The prototype system received an abundance of attention, a positive response, and power was picked up; we're proud to offer the unique TrackTec Valved Bypass Exhaust for those looking for something special.
With valves closed, the familiar sporty, refined tone of the Maxflo mufflers offers a pleasing level of sound with no droning. With one press of the factory Sport button or Fabspeed valve remote, exhaust is free to travel unrestricted through 48mm dump tubes bypassing the mufflers. A frenzy of burbling and crackling erupts with every application of the throttle. A thunderous roar permeates the cabin at just the right volume level. Turn up the volume and turn heads to the tune of an increase of around 15whp and 19ft-lbs of torque at 4000RPM.
Fits all Porsche 981 Boxster/Cayman vehicles (2013-2016)
Includes Deluxe Dual-Style Tips in your choice of finish
Improves horsepower and torque by around 15 whp and 19 ft-lbs at 4000 RPM
Saves 6 lbs from the rear of the vehicle compared to the full OEM exhaust system
Does not trigger Check Engine Light
Constructed from high quality 14-16ga CNC mandrel-bent T304 stainless steel for maximum performance and durability
Noticeable improvement in sports car sound and throttle response
Direct replacement for the OEM muffler with no cutting or welding required
All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty
>>>>
Take a look at the system, and feel free to reach out for forum pricing!!
#3
Instructor
Hey guys! Scott here from Fabspeed Motorsport wanted to profile our 981 Boxster/Cayman TrackTec Valved Bypass Exhaust System. I've had quite a few inquires lately for this system, so here she is
Take a look at the system, and feel free to reach out for forum pricing!!
Take a look at the system, and feel free to reach out for forum pricing!!
Trending Topics
#9
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Join Date: Mar 2017
Location: Philadelphia, Pennsylvania
Posts: 2,449
Received 676 Likes
on
430 Posts
Correct! The exit behind the rear wheels, makes a great exhaust note, with function to open and close the valves. This set up will work with factory headers as well! Feel free to give me a call directly to chat about pricing if interested!
267-742-3049
#11
FWIW, I've had my FS valved exhaust on my 987.1 CS for 2 months, UNFREAKIN' BELIEVABLE! The valved option is the only way to go, it's mild mannered when closed & sounds awesome when open, especially at WOT. I will state that there is a very, very slight drone at lower rpm's, but it hasn't been an issue at all. I'm a very happy, (and unsolicited), customer...
#12
This sounds like all I could ever want for in an exhaust... Few questions if that's okay!
1. Can I retro fit the coding/button for the PSE and then buy the PSE version of this easy enough? I want that "OEM" feel to it.
2. I'm based in the UK, is Design911 the best place to purchase this from? Link: https://www.design911.co.uk/fu/prod1...--981C-Cayman/
Thanks!
1. Can I retro fit the coding/button for the PSE and then buy the PSE version of this easy enough? I want that "OEM" feel to it.
2. I'm based in the UK, is Design911 the best place to purchase this from? Link: https://www.design911.co.uk/fu/prod1...--981C-Cayman/
Thanks!
#13
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
This sounds like all I could ever want for in an exhaust... Few questions if that's okay!
1. Can I retro fit the coding/button for the PSE and then buy the PSE version of this easy enough? I want that "OEM" feel to it.
2. I'm based in the UK, is Design911 the best place to purchase this from? Link: https://www.design911.co.uk/fu/prod1...--981C-Cayman/
Thanks!
1. Can I retro fit the coding/button for the PSE and then buy the PSE version of this easy enough? I want that "OEM" feel to it.
2. I'm based in the UK, is Design911 the best place to purchase this from? Link: https://www.design911.co.uk/fu/prod1...--981C-Cayman/
Thanks!
Those are some great questions.
You can retrofit the button into the PSE if you want to go that route. You can also do the same process to hook it into the homelink button as you would a garage door opener.
I will shoot you a private message to talk about where to purchase from and if you have any other questions.
__________________
Porsche Performance Specialist
John@Fabspeed.com
215-618-9796
Fabspeed Motorsport USA
155 Commerce Drive Fort Washington, PA 19034
www.Fabspeed.com
Porsche Performance Specialist
John@Fabspeed.com
215-618-9796
Fabspeed Motorsport USA
155 Commerce Drive Fort Washington, PA 19034
www.Fabspeed.com
#14
Comparison in weight, power and sound to PSE?
Any issues for this exhaust and smog in CA?
Any issues for this exhaust and smog in CA?
#15
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Join Date: Mar 2017
Location: Philadelphia, Pennsylvania
Posts: 2,449
Received 676 Likes
on
430 Posts
**** DEVELOPMENT*****
Extremely happy to Introduce our brand new Monoblock Wing Risers!
Improve the look and aero of your Cayman GT4 with our Monoblock Wing Risers while also increasing your rear visibility.
FEATURES:
Extremely happy to Introduce our brand new Monoblock Wing Risers!
Improve the look and aero of your Cayman GT4 with our Monoblock Wing Risers while also increasing your rear visibility.
FEATURES:
- Fits all Porsche 981 Cayman GT4 models (2015-2016) & 718 GT4 models (2020+) worldwide
- Raises the wing 6 in / 152 mm and moves it rearwards by 1 in / 25 mm
- 3 angle of attack settings, ranging from the factory 21 degrees to the most aggressive setting of 27.4 degrees
- CAD designed and thoroughly stress tested to withstand over 3G’s of cornering force and 1200 lbs of total downforce
- CNC machined from billet USA 6061 T6 aluminum in house on our HAAS VF2
- Increased downforce by moving the rear wing farther from the car body into a higher airstream just like a CUP car
- Better visibility and safety
- Direct replacement one-piece billet aluminum competition-style struts
- Simple DIY (Do-It-Yourself) bolt-on installation, no cutting required
- Installation instructions coming soon
- All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty
- Your choice of finish in factory crinkle black or clear coated billet aluminum
- Want more color and customization options? Cerakote coloring and hard anodizing available
- Custom color inquiries should click the image below or email sales@fabspeed.com for information
- All custom coloring is non-returnable - however, if you’re unsatisfied with your color choice, simply return, pay a small fee, and we will re-coat them! *limit 1 per order*