Ultimate DIY 987.2 Spyder Inside Gopro Mount
#1
Rennlist Member
Thread Starter
Ultimate DIY 987.2 Spyder Inside Gopro Mount
Doing a DE day this weekend at COTA and wanted to use the Gopro along with Harry's. I was surprised to see there were no off-the-shelf mounts that put the camera somewhere behind the driver. For roughly $20 I put one together using zip ties and a couple simple parts. Easy on/easy off, no mess, bottom is padded so it won't hurt the rollover protection, adjustable angle...
Thought I'd share it here. Used this part:
Will see how it does at the track!
Thought I'd share it here. Used this part:
Will see how it does at the track!
#2
Addict
Rennlist Member
Rennlist Member
I may have to give that a shot. I had tried mounting the camera on the lexan divider using a suction cup mount but the piece actually flutters in the wind at high speed. I gues I’m lucky it didn’t fly off!
#3
Rennlist Member
Thread Starter
Yes, the lexan definitely will move around. I have a feeling this will get some wobble at 130+ mph if I have the top off too... but I don't trust the lexan and have put it in permanent storage.