Track tire question: R888R
Anyone running R888R on the track on their 981S in 18" sizes? If so, what sizes and how do you like them? I've been running Nitto NT01's with good success but would like to try something different. Haven't been able to find much feedback on these tires when used on track.
And yes, I did see the thread on the delamination of the sidewalls. Yet, I'm hopeful those issues have been addressed and I trailer my car to the track so underinflation would hopefully not be an issue. I think I have a soft spot for Toyo's as I used to run RA1's for years. Thanks. |
I’ve run the Nittos at DE’s and found them to be adequate for that use. I presume the Tokyo’s would be similar. I thought I’d use the Nittos for my recent race weekend, (Sebring 48Hours) since it was my first race, and I just wanted to get a feel for racing. During test and tune, when I realized how many seconds/lap I was giving up, my competitive juices kicked in and I went to the on-site vendor and bought a set of Hoosiers. Huge difference of course, and I immediately set much faster lap times. Since you are trailering, consider Hoosiers. |
Following this thread.
|
Originally Posted by Mark Dreyer
(Post 14859439)
I’ve run the Nittos at DE’s and found them to be adequate for that use. I presume the Tokyo’s would be similar. I thought I’d use the Nittos for my recent race weekend, (Sebring 48Hours) since it was my first race, and I just wanted to get a feel for racing. During test and tune, when I realized how many seconds/lap I was giving up, my competitive juices kicked in and I went to the on-site vendor and bought a set of Hoosiers. Huge difference of course, and I immediately set much faster lap times. Since you are trailering, consider Hoosiers. And then when I get to the track and see that guy who is 1 sec faster in his 991 Turbo, I think, “if only I had Hoosiers...” So I definitely get what you’re saying. :rockon: But back to my original post... |
The issue with Hoosiers is you really need more camber than you can reasonably run on the street. If you set up for the street you trash the Hoosiers quickly if you set up for the track your street tires wear poorly. When my car was dual purpose I modified the suspension and put up with lousey tire wear on the street. Now I have a new set of issues on how to juggle the slicks for practice, qualifying and races over the weekend.
|
I am thinking about this too. I am running RE71R on 18's for my DE's, but thinking of maybe trying something different when they wear out. Any feedback would be good.
|
I've run the Toyo's on my 71 track car for several years and have liked them a lot. My spec for a track tyre is pretty much "If it rains I have to be able to drive home" so they work well in that case. That said on the Cayman which is new to me as a track car this year I'm trying out the RE71Rs which I've run on our Lemons car and liked too. So I'd say give em a try.
|
Originally Posted by diverdog
(Post 14862994)
The issue with Hoosiers is you really need more camber than you can reasonably run on the street. If you set up for the street you trash the Hoosiers quickly if you set up for the track your street tires wear poorly. When my car was dual purpose I modified the suspension and put up with lousey tire wear on the street. Now I have a new set of issues on how to juggle the slicks for practice, qualifying and races over the weekend.
I think you'll find there is little difference in speed from R888s and the NT01s. I don't know why some folks really hate the R888s, but there have been many complaints about them over the years. I have never had any issues with them other then they don't provide the bang for the buck that the NT01s do. (good right to the cords) R888s just have a more narrow working window. The RA1 was a spectacular DE tire. I understand why you miss it. I kind of feel the NT01 is today's solution to the RA1. |
Originally Posted by ramans
(Post 14864049)
I've run the Toyo's on my 71 track car for several years and have liked them a lot. My spec for a track tyre is pretty much "If it rains I have to be able to drive home" so they work well in that case. That said on the Cayman which is new to me as a track car this year I'm trying out the RE71Rs which I've run on our Lemons car and liked too. So I'd say give em a try.
However, part of what I hope to do with the R888R is to jump up in size from my current NT01 245/40-18, 275/40-18 to maybe a R888R 255/35-18, 295/30-18. However, I'm not certain if the ABS will tolerate that size as the diameter is the same front to back. In fact, I may start a thread asking specifically about tire diameter to gather more people's experiences.
Originally Posted by Hoosier_Daddy
(Post 14864076)
This ^^^
I think you'll find there is little difference in speed from R888s and the NT01s. I don't know why some folks really hate the R888s, but there have been many complaints about them over the years. I have never had any issues with them other then they don't provide the bang for the buck that the NT01s do. (good right to the cords) R888s just have a more narrow working window. The RA1 was a spectacular DE tire. I understand why you miss it. I kind of feel the NT01 is today's solution to the RA1. |
Will be interested in your comments if you run a set. They are reasonable -- I would run 19 inch -- at about $1200 for a set. Trying my damnedest to stay away from the addiction of Hoosiers or pre-cycled slicks as I just don't want to go down that road again. Need more heat cycles per dollars spent.
|
All times are GMT -3. The time now is 09:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands