718: PASM Springs on non-PASM car?
#1
Intermediate
Thread Starter
718: PASM Springs on non-PASM car?
Hey there,
Not too satisfied with the overall ride height of the 718C w/o PASM. Just about every aftermarket spring out there lowers the car approx 30mm. For my daily driver here in CO, that's too much. I'm in the market for a 10mm drop where a slight increase in stability at speed that a stiffer spring would offer would also be welcome. Has anyone installed PASM springs on a non-PASM 718? It sounds like a good idea in theory.
Not too satisfied with the overall ride height of the 718C w/o PASM. Just about every aftermarket spring out there lowers the car approx 30mm. For my daily driver here in CO, that's too much. I'm in the market for a 10mm drop where a slight increase in stability at speed that a stiffer spring would offer would also be welcome. Has anyone installed PASM springs on a non-PASM 718? It sounds like a good idea in theory.
#3
Rennlist Member
You're probably not going to find anyone who went through the effort and expense of changing out springs just for a 10mm drop and slight change in spring rate, IMO. It would probably be fine, but would be a decent chunk of change for minimal gain. The 981 shocks can handle 20+mm lower and stiffer springs just fine, so I'm sure the 718 version can as well. You're very unlikely to notice increased stability just through a slight stiffness increase and slight drop.
#4
Banned
I understand the not wanting to lower the car much if it's a daily driver in our area. And most aftermarket solutions are going to lower the car more than you want as stated above.
I would look at sway bars (have no ideal whats available) or get 2 sets of wheels/tires, one summer with RE-71 or similar and one with all season/winter tires.
I would look at sway bars (have no ideal whats available) or get 2 sets of wheels/tires, one summer with RE-71 or similar and one with all season/winter tires.
#6
Intermediate
Thread Starter
You're probably not going to find anyone who went through the effort and expense of changing out springs just for a 10mm drop and slight change in spring rate, IMO. It would probably be fine, but would be a decent chunk of change for minimal gain. The 981 shocks can handle 20+mm lower and stiffer springs just fine, so I'm sure the 718 version can as well. You're very unlikely to notice increased stability just through a slight stiffness increase and slight drop.