981 OEM rear camera retrofit
#31
Registered User
My bet is there is a module required that he didn't source. Most kits I've seen require a little black box in between the camera and the PCM and this poster only had the camera and harness (and a few brackets) in his bag of tricks. Still hopeful, though, because this would really be a nice add if it works.
IMO, I think you may be right. My research of an OEM solution shows that the OEM rear view camera (I638) was included in with the F&R Park Assist Package(I636/I638) in certain 911s. Looking at the Porsche Parts Listing for these options also includes, along with the above mentioned brackets, harness, etc.; a Controller Unit #95B919475B is also part of the package:
https://www.gaudinporscheparts.com/o...MtNGwtaDYtZ2Fz
As you, I'm still hopeful that Godly's package works out........but at this point, I doubt it.
#32
Rennlist Member
Spyder,
IMO, I think you may be right. My research of an OEM solution shows that the OEM rear view camera (I638) was included in with the F&R Park Assist Package(I636/I638) in certain 911s. Looking at the Porsche Parts Listing for these options also includes, along with the above mentioned brackets, harness, etc.; a Controller Unit #95B919475B is also part of the package:
https://www.gaudinporscheparts.com/o...MtNGwtaDYtZ2Fz
As you, I'm still hopeful that Godly's package works out........but at this point, I doubt it.
IMO, I think you may be right. My research of an OEM solution shows that the OEM rear view camera (I638) was included in with the F&R Park Assist Package(I636/I638) in certain 911s. Looking at the Porsche Parts Listing for these options also includes, along with the above mentioned brackets, harness, etc.; a Controller Unit #95B919475B is also part of the package:
https://www.gaudinporscheparts.com/o...MtNGwtaDYtZ2Fz
As you, I'm still hopeful that Godly's package works out........but at this point, I doubt it.
#33
I just finished coding the Maxspeed camera. I had installed it a couple of weeks ago but couldn't get a dealer appointment until today, but in the meantime Maxspeed came out with the coding tool rental. I canceled the appointment and Nello sent me the tool, I followed the instructions and it works. Nothing shows, the camera is about 4" right of center but it isn't noticeable and I'm happy. No one but me will know it isn't factory.
#34
Rennlist Member
I just finished coding the Maxspeed camera. I had installed it a couple of weeks ago but couldn't get a dealer appointment until today, but in the meantime Maxspeed came out with the coding tool rental. I canceled the appointment and Nello sent me the tool, I followed the instructions and it works. Nothing shows, the camera is about 4" right of center but it isn't noticeable and I'm happy. No one but me will know it isn't factory.
Any details regarding the removal of the trim pieces you could offer to assist the next guy? Did you do it or did you have a shop handle the install?
#36
Registered User
#37
Hey guys, sorry for long wait, but i am stuck with PCM 3.43 as there is no way to update it to 4.76 version.
I have latest DVD for it, but as my PCM is early, it cant go above 3.43 version.
So now trying to figure out how to hack it.
I have latest DVD for it, but as my PCM is early, it cant go above 3.43 version.
So now trying to figure out how to hack it.
#38
I’ve got this same problem. I find it asinine that Porsche did this with our PCM3.1.
ALL 2013 981 should have the same PCM3.1, not some lesser variant of it.
I just pray that it fails before my warranty ends next year and Porsche is forced to replace it.
ALL 2013 981 should have the same PCM3.1, not some lesser variant of it.
I just pray that it fails before my warranty ends next year and Porsche is forced to replace it.
#39
Hey Godly and Mrg02D... Sucks doesn't it! Such a "major impact" in such a "minor" rev (meaning they left it called "PCM 3.1" even though we are clearly missing some important stuff!).
And I haven't seen any evidence that you can take a newer PCM and just plop it in (though Id like to believe a newer PCM 3.1 should go, but at that point....)
For now I just went with a FenSens backup sensor thing + android.
And I haven't seen any evidence that you can take a newer PCM and just plop it in (though Id like to believe a newer PCM 3.1 should go, but at that point....)
For now I just went with a FenSens backup sensor thing + android.
#40
Hey Godly and Mrg02D... Sucks doesn't it! Such a "major impact" in such a "minor" rev (meaning they left it called "PCM 3.1" even though we are clearly missing some important stuff!).
And I haven't seen any evidence that you can take a newer PCM and just plop it in (though Id like to believe a newer PCM 3.1 should go, but at that point....)
For now I just went with a FenSens backup sensor thing + android.
And I haven't seen any evidence that you can take a newer PCM and just plop it in (though Id like to believe a newer PCM 3.1 should go, but at that point....)
For now I just went with a FenSens backup sensor thing + android.
Porsche should have released some sort of upgrade kit.
#41
Registered User
For those with the 2013 PCM 3.1, would this be an option:
https://navtv.com/products/NTV-MOD03...n-service.html
Expensive! But would keep the OEM look....
Also found this:
https://navtv.com/products/NTV-MOD03...n-service.html
Expensive! But would keep the OEM look....
Also found this:
Last edited by kyflatsixfan; 03-16-2018 at 12:40 PM. Reason: Add Video
#43
Now i have ordered:
https://www.aliexpress.com/item/Orig...801828512.html
and
https://www.aliexpress.com/item/Orig...803823024.html
Have no idea when i get them.. But maybe those things will help me to connect camera.
As harness and camera already installed lol
https://www.aliexpress.com/item/Orig...801828512.html
and
https://www.aliexpress.com/item/Orig...803823024.html
Have no idea when i get them.. But maybe those things will help me to connect camera.
As harness and camera already installed lol
#45