Jason987.2

Hello folks,

I have a 987.2 to which I'm trying to retrofit PASM.
I already have the parts.

My question is, how does the accelerometer attach to the rear driver side area near the top of the shock absorbers?

Below is what the accelerometer looks like.

There are 2 accelerometers. One at the top of the front right damper (there's an obvious spot where it bolts to), and one in the rear left.



I have the bracket below; can't figure out how it would attach in the rear of the car. (At the front, it looks like my car already has the bracket built in)

Jason987.2

<how do I delete a double post?>

Ubermensch

Is this inside the hatch or is it visible from the underside? I'm swapping pads tomorrow and i can take a look.

Jason987.2

It should be under the inside body panels in the hatch, more likely on the driver side...


TIA

Tremelune

Oh my, has anyone ever done this successfully?

Croc999

i have PASM but have no idea on this.
the #1 on your diagrams look an awful similar to PASM control unit (which is located at the passenger legs area behind the carpet.

Jason987.2

Could I bother you to check the label?
Does it say "Damptronic" and is the part number 997.618.45.001?
TIA