Cab rear seat conversion
02-18-2002, 07:19 PM
#1
7th Gear
Thread Starter
Join Date: Jun 2001
Location: PCA NNJR
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Cab rear seat conversion
While attempting to perform the rear seat conversion to my '95 968 cab I unexpectedly found that the center bolt holes for the seat belts are plugged. After looking at 968.net and talking to several people who had done the conversion I was surprised to find them plugged. I cut the carpet and took a peek, looks like it's aluminum and it doesn't give when poked.
Has anyone out there found this? I am hesitant to drill into it without knowing the thickness of the material and what is behind it.
Any insight would be appreciated,
Has anyone out there found this? I am hesitant to drill into it without knowing the thickness of the material and what is behind it.
Any insight would be appreciated,
03-29-2002, 12:25 AM
#4
Racer
Join Date: Jan 2002
Location: San Diego, CA
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
I am going the other way with my S2 Cab. Taking out the rear seats in favor of the seatless 968 style. I have linen interior, any trades out there? <img src="graemlins/bigok.gif" border="0" alt="[thumbsup]" />