Parting 5 968's, (3 coupes and 2 cabs)
#31
Originally Posted by rpm's S2
How about a tan drivers seat in good-excellent condition (i.e. little or no cracks or outer bolster wear)?
The 1st one is about a 7.5 out of 10 ($450), and the 2nd one is about a 6 out of 10 ($400).
#32
D993
Do you have any with the factory option flip phone - I'm looking for just the center console piece (replaced the cassette holder) in tan or black. I don't need it to be working or even the phone guts just the shell would work.
Thanks, Sam
Do you have any with the factory option flip phone - I'm looking for just the center console piece (replaced the cassette holder) in tan or black. I don't need it to be working or even the phone guts just the shell would work.
Thanks, Sam
#33
Rennlist Member
Join Date: Nov 2003
Location: Ottawa, Ontario, Canada
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Are you talking about the "base" or the "cradle" for the phone? If so I've got one that I dont plan on using. Send me an email at 1crh@qlink.queensu.ca .... there are some 968 parts that I need too!
#35
Instructor
Join Date: Jun 2001
Location: Assonet, MA
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
For those looking for 968 body parts, engines, cranks, and so on, I also have quite a collection of parts for sale, however, in an effort to avoid hijacking this thread I will only offer parts that are otherwise not available from d993 at this time.
I have a set of very decent, true 17" cup wheels (M030) 7.5" fronts, 9" rears - These are the actual factory "cup" wheels, not the factory "cup style" wheels which are solid spoke 7" front, and 9" rears. These wheels include the painted crests ($250.00 option) - $1100.00 takes the set. The wheels are in very good shape with just one wheel having a noticable cosmetic flaw, otherwise the wheels are in real nice shape.
I have fenders, heads, cranks, cams, vario cam solenoids, rods, bellhousings, clutch assemblies, starters, rear bumper covers, torque tubes, drive axles, shift rods, some late-style blue interior pices, plus many other parts.
Also, I have a set of GT-Racing fiberglass fenders, rear quarters, rocker panels, hood, front bumper cover, ABS faux headlights/covers. New, never installed - $1,400.00 takes it all - Roughly half of GT-Racing's catalog prices.
Again, please use d993 as your primary source before you contact me, if he does not have it, then please feel free to tap me as a resource.
Thanks in advance!
I have a set of very decent, true 17" cup wheels (M030) 7.5" fronts, 9" rears - These are the actual factory "cup" wheels, not the factory "cup style" wheels which are solid spoke 7" front, and 9" rears. These wheels include the painted crests ($250.00 option) - $1100.00 takes the set. The wheels are in very good shape with just one wheel having a noticable cosmetic flaw, otherwise the wheels are in real nice shape.
I have fenders, heads, cranks, cams, vario cam solenoids, rods, bellhousings, clutch assemblies, starters, rear bumper covers, torque tubes, drive axles, shift rods, some late-style blue interior pices, plus many other parts.
Also, I have a set of GT-Racing fiberglass fenders, rear quarters, rocker panels, hood, front bumper cover, ABS faux headlights/covers. New, never installed - $1,400.00 takes it all - Roughly half of GT-Racing's catalog prices.
Again, please use d993 as your primary source before you contact me, if he does not have it, then please feel free to tap me as a resource.
Thanks in advance!
#36
Originally Posted by Under Pressure Performance
For those looking for 968 body parts, engines, cranks, and so on, I also have quite a collection of parts for sale, however, in an effort to avoid hijacking this thread I will only offer parts that are otherwise not available from d993 at this time.
I have a set of very decent, true 17" cup wheels (M030) 7.5" fronts, 9" rears - These are the actual factory "cup" wheels, not the factory "cup style" wheels which are solid spoke 7" front, and 9" rears. These wheels include the painted crests ($250.00 option) - $1100.00 takes the set. The wheels are in very good shape with just one wheel having a noticable cosmetic flaw, otherwise the wheels are in real nice shape.
I have fenders, heads, cranks, cams, vario cam solenoids, rods, bellhousings, clutch assemblies, starters, rear bumper covers, torque tubes, drive axles, shift rods, some late-style blue interior pices, plus many other parts.
Also, I have a set of GT-Racing fiberglass fenders, rear quarters, rocker panels, hood, front bumper cover, ABS faux headlights/covers. New, never installed - $1,400.00 takes it all - Roughly half of GT-Racing's catalog prices.
Again, please use d993 as your primary source before you contact me, if he does not have it, then please feel free to tap me as a resource.
Thanks in advance!
I have a set of very decent, true 17" cup wheels (M030) 7.5" fronts, 9" rears - These are the actual factory "cup" wheels, not the factory "cup style" wheels which are solid spoke 7" front, and 9" rears. These wheels include the painted crests ($250.00 option) - $1100.00 takes the set. The wheels are in very good shape with just one wheel having a noticable cosmetic flaw, otherwise the wheels are in real nice shape.
I have fenders, heads, cranks, cams, vario cam solenoids, rods, bellhousings, clutch assemblies, starters, rear bumper covers, torque tubes, drive axles, shift rods, some late-style blue interior pices, plus many other parts.
Also, I have a set of GT-Racing fiberglass fenders, rear quarters, rocker panels, hood, front bumper cover, ABS faux headlights/covers. New, never installed - $1,400.00 takes it all - Roughly half of GT-Racing's catalog prices.
Again, please use d993 as your primary source before you contact me, if he does not have it, then please feel free to tap me as a resource.
Thanks in advance!
There are a lot of parts that I don't have, so I'm not scared I will lose a customer to you or anyone else.
I am selling off all my 944/968 stuff, but I'm not in a big hurry.............
I'm moving into the "all air-cooled" Porsche area.
I guess the 944/968 models handle too good, and they're not scary enough.
#38
Instructor
Join Date: Jun 2001
Location: Assonet, MA
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
I don't have the clutch cover as a separate piece, but I do have a complete bellhousing. It may not make sense to buy a complete bellhousing if all you need is the cover, but finding a cover is the key.
If you cannot find the cover itself, keep the bellhousing in mind.
If you cannot find the cover itself, keep the bellhousing in mind.
#41
Originally Posted by cellis59
How much for the bellhousing?
__________________
87 951
A 3.0 bellhousing will be $300.
A black set of door panels will be $350.
#43
Instructor
Join Date: Jun 2001
Location: Assonet, MA
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
I have several 3.0L cranks, a few are STD/STD stock, others are STD/STD lightened, knife edged, balanced, allen plugs. Feel free to contact me directly for price and options.
#44
Addict
Rennlist Member
Rennlist Member
Join Date: Dec 2001
Location: Virginia Beach
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
d993,
Do you have any rear shelves for the 968 cabs? Also, I am looking for the trim piece that covers the front part of the cab top that locks down to the windshield. I would like both in black. If you have that piece I would be willing to order other parts in order to meet the requisite minimum order. Thanks
Do you have any rear shelves for the 968 cabs? Also, I am looking for the trim piece that covers the front part of the cab top that locks down to the windshield. I would like both in black. If you have that piece I would be willing to order other parts in order to meet the requisite minimum order. Thanks
#45
Addict
Rennlist Member
Rennlist Member
Join Date: Dec 2001
Location: Virginia Beach
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Also,
Could I possibly get some pictures of the sport seats if their still available? Please email me at maciek.kepka@richmond.edu Thanks
Could I possibly get some pictures of the sport seats if their still available? Please email me at maciek.kepka@richmond.edu Thanks