Checking cam timing
#61
Registered User
Thread Starter
Joel's spring came today! Chain tensioner seems to operate normally.
Made some cam hold down blocks today as well. Now have to make the threaded rods.
THANK YOU JOEL!!!!
Made some cam hold down blocks today as well. Now have to make the threaded rods.
THANK YOU JOEL!!!!
#63
Registered User
Thread Starter
Originally Posted by Jfrahm
Wow, that's good. Any indication why it took so darn long? Almost 2 weeks in the wind. Weird.
Cheers, -Joel.
Cheers, -Joel.
#64
#66
Registered User
Thread Starter
Here is how I made the threaded rods for the cam saddles if anyone needs to know one way to do it. Thanks to Jshiery for this idea.
I bought 2 of these top dead center indicators.
The inner screw is 3/8th x 16
Went to ace hardware and got a 3/8-16 threaded rod.
https://www.speedwaymotors.com/Top-D...SABEgIT6vD_BwE
I bought 2 of these top dead center indicators.
The inner screw is 3/8th x 16
Went to ace hardware and got a 3/8-16 threaded rod.
https://www.speedwaymotors.com/Top-D...SABEgIT6vD_BwE