Workshop Manuals
#77
#78
Hello sir ,
I would also like access please for my 92 965, I sent you a PM
heliolps2@yahoo.com
Thank you sir
Heliolps2
Helio Lopes
#79
Rennlist Member
Thank you for the access , Do you have access the 964 turbo volume II heating and ventilation and body section wasn't included in the access you granted me, or if someone else has it and can send it to me that would be cool also,
Thank you !
heliolps2@yahoo.com
Thank you !
heliolps2@yahoo.com
#80
Thank you for the access , Do you have access the 964 turbo volume II heating and ventilation and body section wasn't included in the access you granted me, or if someone else has it and can send it to me that would be cool also,
Thank you !
heliolps2@yahoo.com
Thank you !
heliolps2@yahoo.com
#81
I have the 3.3 and 3.6 manuals in .pdf, here is the link https://drive.google.com/folderview?...Ek&usp=sharing.
Access is restricted so you will need to ask for authorisation.
Access is restricted so you will need to ask for authorisation.
I need all about engine and tightering torques
thanks in advance, and sorry for bad english)
my e-mail saneba174@gmail.com
#82
Rennlist Member
If you need specifications about the cars and tightening torques the best resource is the Technical specification books. They measure about 3 x 4" and have all the specs and torques for the 964 model line.
Part number WKD 423 920 2M You can get these from Porsche for about $45. It also appears that the workshop manuals have been rereleased in gray vs the original red binders. for not much.https://www.suncoastparts.com/catego..._By=disp_order
Part number WKD 423 920 2M You can get these from Porsche for about $45. It also appears that the workshop manuals have been rereleased in gray vs the original red binders. for not much.https://www.suncoastparts.com/catego..._By=disp_order
#83
X33
hi,
do you have any information / manual for the wls upgrade in the 1991/92 964 turbo 3.3. x33
it was often mounted later at the local porsche dealer - so someone needed a how to....
thank you for any help....!
stefan
do you have any information / manual for the wls upgrade in the 1991/92 964 turbo 3.3. x33
it was often mounted later at the local porsche dealer - so someone needed a how to....
thank you for any help....!
stefan
#84
Desperation !
Hiya !
In in desperate need of 1991 3.3 workshop manual if possible !! Car ment to be on track next weekend but still in pieces ! Any info greatly appreciated !!
All the best
dj-marshall@outlook.com
(won’t let me pm for some reason)
In in desperate need of 1991 3.3 workshop manual if possible !! Car ment to be on track next weekend but still in pieces ! Any info greatly appreciated !!
All the best
dj-marshall@outlook.com
(won’t let me pm for some reason)
Last edited by P-tek; 08-22-2018 at 05:16 PM. Reason: Update
#85
#86
#87
Hello Max. New to using the forum. I have 1990 C4 converted with a 1985 930 turbo. Looking for some technical manuals to help. It has run great for the the past five years, but last summer it starts to miss/sputter whenever it goes on boost. The car has a number of previous owners - so not sure what it going on. Appreciate any help via access to the manuals if possible.
thanks
donato
thanks
donato
#88
Instructor
@dmartone I had a similar issue with my 964 turbo and the culprit was the o-ring on the throttle body/intercooler connection. They wear out over time and leak air when the pressure increases. It’s a relatively simple fix.
Worth a look.
Worth a look.
The following users liked this post:
heliolps2 (05-04-2022)