965 3.3 : Electronic Fuel Injection (EFI)
#1
Intermediate
Thread Starter
Join Date: Aug 2009
Location: France
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
965 3.3 : Electronic Fuel Injection (EFI)
Hi,
i'm a french owner of a 1992 964 TURBO 3.3, and i would like to show you my EFI project, nearly finished after 3 months of hard work. I just need to opimize my MAP because i'm using a simple lambda sensor instead of wideband lambda sensor... So i'm waiting for ~520HP with great MAP (at 1.1bar).
But actually, with a bad AFR of ~9/10, my engine has got 471HP and 645Nm (at 0.9bar), you can see below pictures of my project :
My 965 :
And power/torque here : (before and after EFI)
Sorry in advance for my poor english, and please.... speak slowly
i'm a french owner of a 1992 964 TURBO 3.3, and i would like to show you my EFI project, nearly finished after 3 months of hard work. I just need to opimize my MAP because i'm using a simple lambda sensor instead of wideband lambda sensor... So i'm waiting for ~520HP with great MAP (at 1.1bar).
But actually, with a bad AFR of ~9/10, my engine has got 471HP and 645Nm (at 0.9bar), you can see below pictures of my project :
My 965 :
And power/torque here : (before and after EFI)
Sorry in advance for my poor english, and please.... speak slowly
#2
Burning Brakes
Nice pieces.. tell us about the "commander/ECU?"
Last edited by onboost; 08-07-2009 at 04:11 PM.
#4
Intermediate
Thread Starter
Join Date: Aug 2009
Location: France
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Thank you onboost, the ECU is a Sybele Commander44 from skynam, you can see more informations here :
http://209.85.229.132/translate_c?hl...ykZr-1isRwaLIw
It was not a good choice because we are the first to use it ! A lot of time spend to understand this ECU and some bugs like with all new product... but now it's ok
http://209.85.229.132/translate_c?hl...ykZr-1isRwaLIw
It was not a good choice because we are the first to use it ! A lot of time spend to understand this ECU and some bugs like with all new product... but now it's ok
Last edited by rodolf; 08-07-2009 at 07:49 PM.
#5
Intermediate
Thread Starter
Join Date: Aug 2009
Location: France
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
EFI hardware (~$3500), there are EFI injector block package with fuels rails and sensors.
I've got too a manifold extrude hone, open ports to 40mm with cylinder head insulator blocks tapered bore down to 32mm (40>32).
I've got a GT35 turbocharger from garrett (ball bearing), headers from GoingSuperFast and a HKS super sequential blow off valve (nice sound !!).
It's not the standard intercooler, i've got this one from blownsix : http://www.blownsixdesign.com/new/965.html
#7
Intermediate
Thread Starter
Join Date: Aug 2009
Location: France
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Burning Brakes
#13
Registered User
Hey Rodolf.... welcome aboard, your car is awsome and will be even better with EFI. Your wheels almost look like 19 inchers in your avatar. Keep us up to date on everthing.
Last edited by Boeing 717; 08-08-2009 at 10:58 PM.