Fabspeed 964 Turbo Header Package
#17
Hi Bucking, we have not had the opportunity of a 964 Turbo come into the shop to do the header installation yet so we dont have any photos of that car with the system. Let me know if you know anyone who is interested in the headers system and would like to have it installed in our shop for a full write up with photos and videos. Let me know if you have any other questions.
Thanks,
Thanks,
#18
7th Gear
Fabspeed headers?
I am aiming to buy a set of headers within a couple of months.
Has anyone tried Fabspeed headers on a 964 Turbo?
I have heard negative things about GSF concerning fitment so its unlikely that i will buy those. As it seems today I will either go for Rarlyl8 or Fabspeed.
Last edited by Mayor; 06-28-2013 at 05:03 AM.
#19
Burning Brakes
Join Date: Feb 2012
Location: London, Ontario, Canada
Posts: 813
Likes: 0
Received 4 Likes
on
3 Posts
I have them on my 92. No complaints. They were put on by the PO. If you want to have a look at the car build, it is here.. http://www.auto-edge.com/pages/Proje...el=965%20Turbo Scroll down on the left side of the pictures
This guy spared no expense on the build, and in his opinion (and that of the shop) these were the best option
This guy spared no expense on the build, and in his opinion (and that of the shop) these were the best option
#22
Burning Brakes
Join Date: Feb 2012
Location: London, Ontario, Canada
Posts: 813
Likes: 0
Received 4 Likes
on
3 Posts
Thanks guys.. It has user selectable boost, .7 and 1 bar.. I normally run it at .7 for most driving around.. the dyno figures that came with the car have it at 425HP at 1 bar, 426 ft/lb of torque
#24
Burning Brakes
The cat bypass pipe I got from Fabspeed was much better fitment than a B&B one I got (and returned FWIW). Not perfect but better for sure. I'd like to do headers but, frankl, the idea of removing the OE setup scares the $hit out of me - broken studs, drilling - ohh the nightmare I've heard....