Rothsport Billet Shifter - Interior Finishing Kit
#121
Rennlist Member
Sub'd for updates.
This will be my next mod.
This will be my next mod.
#122
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
I'll post something soon.... investing in an injection mold to be able to produce these like the original trim pieces. Time consuming and very costly $$$$ setup but how it must be done to do this right.
__________________
Instagram :Swine11 | TitanMotorsports
Swine11 ReBoot - 964 / 993 Shift Boot Trim Panel
2004 996 GT3 | 1986 Carrera 3.2 (future Keen Project) | 2016 Cayenne Diesel
Instagram :Swine11 | TitanMotorsports
Swine11 ReBoot - 964 / 993 Shift Boot Trim Panel
2004 996 GT3 | 1986 Carrera 3.2 (future Keen Project) | 2016 Cayenne Diesel
#125
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Quick update on my front. The mold is completed initial samples are en route to me, fingers crossed everything checks out dimensionally. Finalizing the site and details but if all goes as well and the sample fitment checks out with the prototype these will be live in the next 1-2 weeks. I will likely make a new thread with a more official release once I get some studio shots completed.
#127
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
I'm going to create a new thread for this in the next few days but wanted to drop this here first, since I teased it here first.
I've been working on this for quite some time as a passion project long before seeing this thread and it has led to a new side brand Swine Eleven. The rubber boot is the existing bellow located underneath the console, and the trim panel is engineered to be pressure fit with the spring clips from the original shift boot locking it in place (no hardware required). I've had SLS 3D printed prototypes in a few buddies cars and they've been quite happy with the looks, the Injection molded version just gives it a more OEM finish and I did my best to match the existing trim color and texture as close as possible (there is quite a variation in this though given age and production time of reproduction pieces even from Porsche).
The first batch of panels are complete and ready for shipment at the link below ( the site just launched so if anyone has any issues please PM or email me)
Swine Eleven ReBoot 964 / 993 Shift Boot Trim Panel
I've been working on this for quite some time as a passion project long before seeing this thread and it has led to a new side brand Swine Eleven. The rubber boot is the existing bellow located underneath the console, and the trim panel is engineered to be pressure fit with the spring clips from the original shift boot locking it in place (no hardware required). I've had SLS 3D printed prototypes in a few buddies cars and they've been quite happy with the looks, the Injection molded version just gives it a more OEM finish and I did my best to match the existing trim color and texture as close as possible (there is quite a variation in this though given age and production time of reproduction pieces even from Porsche).
The first batch of panels are complete and ready for shipment at the link below ( the site just launched so if anyone has any issues please PM or email me)
Swine Eleven ReBoot 964 / 993 Shift Boot Trim Panel
#130
Rennlist Member
Join Date: Jun 2014
Location: Tennessee
Posts: 982
Likes: 0
Received 0 Likes
on
0 Posts
Onelove, I didn’t see you have the shift boot bellows for sale as well until I already completed my order. Can i add one to my order to save a little on shipping? Thanks.
#131
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
#132
It’s a good look - saw this car at Rennsport.
#133
Rennlist Member
the final product came out amazing!!! Great work Wes.
Now, my question is, what shifter can i use this with? I currently have FD SSK which is great but the skinny squared off lever wouldn't look great. The rothsport works well, but not looking to upgrade. Does Function First make a shaft "cover" that's long enough to connect to the boot? Looks like that's what's above.
Now, my question is, what shifter can i use this with? I currently have FD SSK which is great but the skinny squared off lever wouldn't look great. The rothsport works well, but not looking to upgrade. Does Function First make a shaft "cover" that's long enough to connect to the boot? Looks like that's what's above.
#134
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
the final product came out amazing!!! Great work Wes.
Now, my question is, what shifter can i use this with? I currently have FD SSK which is great but the skinny squared off lever wouldn't look great. The rothsport works well, but not looking to upgrade. Does Function First make a shaft "cover" that's long enough to connect to the boot? Looks like that's what's above.
Now, my question is, what shifter can i use this with? I currently have FD SSK which is great but the skinny squared off lever wouldn't look great. The rothsport works well, but not looking to upgrade. Does Function First make a shaft "cover" that's long enough to connect to the boot? Looks like that's what's above.
WC Lathe Works makes a **** that has an integrated shaft that is quite the piece, I had purchased one in stainless for my car but once I went RWD it required a different shifter so I went Rothsport.
(I'll be working on a **** in the near future for those looking to complete the package, just have too amen things on my plate right now with these and finishing my build).
#135
Rennlist Member