help: key head replacement
#1
Advanced
Thread Starter
Join Date: Aug 2016
Location: Toronto
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
help: key head replacement
help! any tips on removing the key from the plastic key head?
I removed all the springs and parts from the key head, but the key is still stuck in the key head. I tired warming it up with a hair dryer and spraying it with silicon lubricant.
I removed all the springs and parts from the key head, but the key is still stuck in the key head. I tired warming it up with a hair dryer and spraying it with silicon lubricant.
Last edited by CP_964; 04-26-2017 at 10:03 PM.
#3
Instructor
#4
I had to smash mine apart with a hammer. Sometimes its easier just to replace the whole key and have a new one cut. That way you get a fresh key, too. Always feels good
#5
I broke the plastic apart into pieces with some pliers and then replaced the head with a new one from eBay. As a bonus, the new head has a much brighter LED bulb.
#6
Advanced
Thread Starter
Join Date: Aug 2016
Location: Toronto
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts