Transmission fill plug stripped...any suggestions
Hey Guys
I went to change the oil in my transmission the other day and the fill plug is stripped. I can't get the allen key to catch at all. Any tips on how to get this out now? (I've already ordered new plugs). Thanks |
Can you tap it loose with a cold chisel? I used that method with the seat bolts. Worked perfect.
It's pretty wide, so you have some options, and easy out may work on it. Also a torx bit might fit in there with some tapping and hold it enough to loosen it. |
Hammering torx bits into stripped Allen key holes works for me most of the time
|
An old trick to be used with a Torx or Allen, is to dip the end in some oil, then in some sand. The ssand takes up the slack. It worked for me on a stripped steering rack bolt.
|
Yip A couple of taps with a chisel was enough to get mine out nice tip about the sand.
|
Count me in as another fan if the hammer in a torx method. Worked every time for me.
|
Hopefully there's a Timecert made in the size and pitch of the plug. I'd look for that.
|
All times are GMT -3. The time now is 11:04 AM. |
© 2024 MH Sub I, LLC dba Internet Brands