|
Tit-Wagon - 964C2
So I've been lurking about in here for over a year. I figured it's probably easier to participate on conversations if you all knew who I was! :o
...Background... (November 2013) 18 months. Many Cars. 3 PPIs. Three States. One turned out to be crashed and loaded with bog. One was dribbling oil badly and had been painted in the owners garage. One I was a few hours too late to get the deposit down. I started looking at SCs. Vaguely considered 3.2s. Then started to have a closer look at the 964 and liked what I saw...(and my budget doubled from the beginning of my search). So in the last two months narrowed my search on the 'unloved 911'. I knew I'd missed a few good ones while I was looking at SC's, but ultimately there was three I narrowed it down to. I finally found this C2 on the Porsche Club Victoria website. The car itself is 'tired'. The Indie I had do the PPI, Weltmeister, assessed that it is a 'good, solid, original car' it would cost about $10k to get it sweet. So the owner took that into account and we settled on a price I thought was reasonable. The reason I settled on a 'tired' car was because it seems to me the Carrera 2 is becoming more sought after in the market than the C4. I have no problem with a C4. In fact, I don't consider myself a great driver and the C4 would have been some kind of insurance against ham-fisted technique...The second reason was that most of the things that make it 'tired' were within reach of being fixed...in Matt from Weltmeister's words "All it needs is a birthday"... With a bit of interstate stuffing-about, the car transferred ownership to me in November 2013. The car then went to another indie in Melbourne, AutoArt, for a top-end rebuild, clutch, fly-wheel and a few other 'house-keeping' things to get it fresh. Getting new tires (thinking Michelins, the shops kept trying to talk me into Pirellis ??). Weltmeister said it didn't really need a top-end rebuild, but the leak-down numbers were between 10-12% and at 240,000km I figured it couldn't hurt while it's in there...it also made the clutch change a lot cheaper! Priorities for the car were to get it safe, mechanically sound and then getting it closer to standard. Especially that rear spoiler…yuk! http://photos.smugmug.com/photos/i-8...-8S9FX5D-L.jpg http://photos.smugmug.com/photos/i-g...-gWQwFwc-L.jpg http://photos.smugmug.com/photos/i-s...-snGfG8m-L.jpg http://photos.smugmug.com/photos/i-j...-jWNCwGD-L.jpg |
For a "tired" car, looks pretty fine in those pix!!! :)
|
I'll drop a few of the updates to the car that have happened over 2013/14....
...Finally collecting the car... (December 2014) Turns out the top-end rebuild was a good idea. Two of the rockers were starting to deteriorate badly on the ends that contact with the cam-shaft. The cam shafts were consequently degrading as well. So new ones were installed as well as getting the cam shafts cleaned up. A decent amount of carbon was recovered from the pistons (think five heaped table-spoons). Two of the timing-chain guides were damaged as well, so they were replaced. Obviously the spark plugs were shagged as well. The cylinders were all cleaned and honed. The heads and everything else cleaned up and lots of re-sealing done. New clutch and fly-wheel work a treat, too! http://photos.smugmug.com/photos/i-g...gSXQWNX-XL.jpg http://photos.smugmug.com/photos/i-V...-VdRv7Mr-M.jpg http://photos.smugmug.com/photos/i-c...-cNVTq3T-M.jpg http://photos.smugmug.com/photos/i-v...-vL2HhZx-M.jpg http://photos.smugmug.com/photos/i-n...-n2x3qZR-M.jpg After we collected the car, the next day we went the long-way home (700km drive). Car ran like a (noisy) Swiss watch. The good kind of noises, though. The previous owner kindly left the G-Pipe on the car for me to enjoy. So far the only defects we can find are the dint in the bonnet and the two internal lights in the ceiling not working. The tires are absolutely fubar too. Even the A/C works now! The car did need some attention for most of it's bushings as the steering was sort of 'mushy'. I know 911's have a unique front-end feel, but they shouldn't turn in like the car is driving on the beach (yes, I checked the tire pressures). I'm not too worried as I'll work my way through the car with a fine-toothed comb (as long as the bank account permits...). We forgot to take the DSLR, so crappy phone pics instead... http://photos.smugmug.com/photos/i-z...-zCvT8Jj-M.jpg http://photos.smugmug.com/photos/i-p...-pjLcr9M-M.jpg http://photos.smugmug.com/photos/i-s...swtbV4S-X2.jpg http://photos.smugmug.com/photos/i-f...-fVMd6Ld-L.jpg http://photos.smugmug.com/photos/i-V...-VpM5Gns-L.jpg |
Thanks! 250,000km!
Originally Posted by Cuda911
(Post 11859429)
For a "tired" car, looks pretty fine in those pix!!! :)
|
...CCU....
(December 2013) So - like most 964/993 owners, my AC/Heater controls stayed running after the car is stopped and makes strange buzzing noises for about 15 min after the car is turned off. It also sporadically made a squealing noise when running at any setting less than full-blast. Mercifully, when I had a peek on this site, the first unread topic was someone asking about just this problem... I ultimately had a look at https://rennlist.com/forums/993-1995-1998/353218-how-to-remove-whirring-sound-from-993-dash.html and thought I'd have a crack at it. http://photos.smugmug.com/photos/i-R...-R5BdMKb-L.jpg Everything came out just fine (though the harnesses had me worried I was going to damage something, they were jammed in so tightly). I found that the solution in the thread above did not work, so upon closer inspection, it looked like the magnets in the fan were contacting with the internals on the opposite side of the assembly. http://photos.smugmug.com/photos/i-J...-Jmt3dWJ-L.jpg http://photos.smugmug.com/photos/i-K...-KVPgtqX-L.jpg So I solved the problem by lightly tapping out the shaft of the fan blades about 0.5mm and the fan appeared to be spinning freely again. There was also still spinning resistance from the magnets - hopefully I haven't pushed them too far away from the coil! (it's difficult to see in this photo, but I have a pen-mark at the base of the shaft, and you can see a small gap below that - that's how much I shifted the fan on the shaft...) http://photos.smugmug.com/photos/i-8...-8GxXBQT-L.jpg Anyway...it all went back in and sounds like it's running silently now....hopefully this averts the need to part with $300-ish for a replacement! |
...Clear indicators...
(Feb 2014) I'll be keeping the original stuff, but for now I thought I'd try out clear indicators. Also got a slightly better condition rear light centre section. These are the easiest light fittings I've ever dismantled on any car.. http://photos.smugmug.com/photos/i-j...-j6zCRR9-L.jpg Gave it a clean... http://photos.smugmug.com/photos/i-x...-xnTT2nc-L.jpg One of the lenses was a bit cloudy, so I hit it with some toothpaste and elbow grease....slight improvement... http://photos.smugmug.com/photos/i-Q...-QjZdq3F-L.jpg http://photos.smugmug.com/photos/i-S...-SjBLxzd-L.jpg Rear reflector that's not pink! http://photos.smugmug.com/photos/i-Q...-QGG9dd9-L.jpg |
...Soiler replacement...
(May 2014) Operation Wing-Clip - Painting, Motor and spoiler-curtain still required... http://photos.smugmug.com/photos/i-8...-8G6z3WQ-L.jpg And engine cover off to the painter... http://photos.smugmug.com/photos/i-9...-9hmKcsV-L.jpg Though the painter did a #@$ job. Poorly prepped surface and colour not quite a match, even though I gave them a panel to go off.. http://photos.smugmug.com/photos/i-B...-B6VnqSN-M.jpg http://photos.smugmug.com/photos/i-c...-cVBq4Lv-M.jpg http://photos.smugmug.com/photos/i-V...-VrvZjCt-M.jpg http://photos.smugmug.com/photos/i-J...-JS86wTT-M.jpg http://photos.smugmug.com/photos/i-d...-dH38Q2r-M.jpg http://photos.smugmug.com/photos/i-b...-bzkG9Cj-M.jpg |
...Leaks!...
(June 2014) The old girl started to leak in that classic 964 location - the lower valve covers. I've got some shiny genuine aluminium ones (post 1991/2) here that i got for a bargain from Rennspeed on eBay. http://photos.smugmug.com/photos/i-8...-8hmXLPN-L.jpg http://photos.smugmug.com/photos/i-K...-Kx3MvRp-L.jpg Luckily I had access to a workshop and hoist. But more importantly, an experienced set of hands. Things we had to solve: 1. Leaky oil cooler hoses & totally filthy front oil cooler. 2. Leaky lower valve covers 3. Shagged front swaybar drop links 4. Shagged front control arm bushes 5. Replace tie-rods 6. Oil Change ....Oil cooler hoses... Check out this filth. I only noticed the oil stains after I removed the front drivers side wheel. It looked like it had been leaking far longer than in my ownership. Sort of disappointing that Weltmeister missed this in the PPI. <_< I never had any issues with cooling or oil pressure though. Indeed, it takes quite a while to get up to temp. http://photos.smugmug.com/photos/i-B...-BWqTm56-L.jpg http://photos.smugmug.com/photos/i-z...-znMxnd2-L.jpg http://photos.smugmug.com/photos/i-m...-mbvm2w7-L.jpg http://photos.smugmug.com/photos/i-c...-cTHmbCj-L.jpg Cleaned the cooler up and replaced the hoses... http://photos.smugmug.com/photos/i-N...-Nz9p4V9-L.jpg ...Valve Covers... Replaced the old magnesium ones with later (1992?) aluminium covers and new gaskets. Hopefully that stops the dripping.. Oil drain plug magnet didn't have much on it....which was nice. Everything seemed in good order...rocker/valve spacing seemed good. http://photos.smugmug.com/photos/i-K...-K4JhLZX-L.jpg http://photos.smugmug.com/photos/i-j...-j6pg5Bm-L.jpg Fresh Alu covers: http://photos.smugmug.com/photos/i-J...-J8vcMrw-L.jpg |
...Suspension work...
(June 2014) The bushes were the most time consuming - removing the control arm bushes involved a lot of oxy-torch and saw action. Unfortunately the day was running long and my buddy needed to get home so I thought it wasn't appropriate to whip out the camera. Replaced the drop-links and tie-rods as well. Here's a crappy shot of a new tie-rod going in. Wow! :P http://photos.smugmug.com/photos/i-x...-xPhWcVt-L.jpg I did wake up in the middle of the night wondering if I'd put the drop links on backwards! Hopefully not!! ...Oil Change etc... She ate up over 12 litres of Penrite HPR whatever-it-is...20W-60 Uber-Zinc mineral. (Remembering that the oil lines and cooler were totally empty as well). The car stayed in the shop so that we can drive her up the street for an alignment the following day. Fingers crossed that all that work means it won't handle like a hobo riding a shopping trolley down a hill anymore... |
...Alignment...
(June 2014) Went for the RS specs and the tech got it pretty close: Front (L/R) Camber -1.00 deg / -1deg04min Caster 4deg31min / 4deg32min Toe 1.6mm / 1.4mm (2.9mm total) Rear (L/R) Camber -1deg21min / -1deg21min Toe 1.6mm / 1.3mm (2.9mm total) Looks like my pressures were a little low in the rear, though. So will hit the pump tomorrow 36psi front / 36 psi rear. Anyway....it feels like someone has released the elephant out of my frunk! So much lighter up front, and very responsive steering. I think this is the 911 'feel' people talk about. I'm more aware of the rearward centre of gravity and now I can turn with gentle inputs rather than wrestling the steering wheel around. I think the knackered front drop-link bushes were the most important - those were causing the car to 'fight me' in the roll axis. The other shagged bushings would have also been causing alignment changes under deflection. So now onto the rear bushes once the piggy-bank recovers! And here's another shot of her: http://photos.smugmug.com/photos/i-9...9VHtkwW-XL.jpg |
...Steering Wheel...
(July 2014) Obtained a Momo Mod7 in alcantara. Yes - I know, not very original, but it's something I've always lusted after on these cars. I oringlaly had a 930S steering wheel, which is also nice. Though the boss kit was totally different the the Momo. I had to pull the boss back off to get the horn terminal to make contact....honks good now! http://photos.smugmug.com/photos/i-C...-CLGwc3N-L.jpg http://photos.smugmug.com/photos/i-5.../i-5KQRkjq.jpg Also got the 'Carrera 2' logo fitted... http://photos.smugmug.com/photos/i-r...-2464x1823.jpg Also stuck some yoga mats to the walls to protect my doors...looks ugly, but I'm sure I won't regret it! (You can see the difference in the paint tones in this pic, too. I wonder if some light cutting back of the paint will make the difference?) http://photos.smugmug.com/photos/i-f.../i-fLqLMNq.jpg Went out for a drive with some mates the next day: http://photos.smugmug.com/photos/i-H...-Hhpr6qG-L.jpg |
(August 2014)
Made a new friend: http://photos.smugmug.com/photos/i-p...pTp8Qcv-XL.jpg Had a wash: http://photos.smugmug.com/photos/i-2...2t5vgLJ-XL.jpg |
...Side Skirt Rubbers...
Fixed up the passenger-side weather-strip on the side skirt & finally transferred the rego... Tips for other players - the front clip is a screw-and-(plastic) nut, not a press-in clip.. http://photos.smugmug.com/photos/i-8.../i-8x6DRGW.jpg http://photos.smugmug.com/photos/i-9.../i-9rPk3fb.jpg http://photos.smugmug.com/photos/i-H...HsbbdCM-X3.jpg Broken vs new press-in clips: http://photos.smugmug.com/photos/i-X...XX7nQ89-X3.jpg http://photos.smugmug.com/photos/i-9.../i-9c3Wq2w.jpg |
...Engine Mounts...
(Nov 2014) I've had a set of wevo engine mounts sitting in the garage since April. They were second hand but only lightly used on a 993. I had some concerns about how lose the m12 bolts were in the mounting sleeves but decided I'd try them out anyway. Turned out not to be a problem! http://photos.smugmug.com/photos/i-Q...-1259x1701.jpg http://photos.smugmug.com/photos/i-X...-1259x1701.jpg http://photos.smugmug.com/photos/i-z...-1259x1701.jpg http://photos.smugmug.com/photos/i-8...82zW6nX-X2.jpg Everything I've read about new engine mounts seem to match the experience - shifts are more precise and cornering could be described as 'neater'. There's still a few bushes left to change, but the car is starting to feel a lot less loosey-goosey... |
| All times are GMT -3. The time now is 03:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands