When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
These are made by CEC Wheels and model number is 239. Very very hard wheels to find, and they were quite the desirable wheel to have in the 90s. I had a set a few years back and GREATLY regret selling them. Breaks my heart that these are over the pond; shipping would be killer.
Andrew, thank you so much for posting the additional info - apologies, I've not checked back at this thread for quite a while, just seen your reply.
I've literally done nothing about selling these wheels since posting, been busy dyno'ing the engine and trying to finish the project; I'll shoot you a PM
Rennlister name: neun sechs vier
Asking price: £600
Location: Andover, Hampshire, UK
Will ship to: Yes
Ad Link:
Condition: Used
Wheel make: Italian Replica
Wheel model: Cup 1
Offsets: ET 52, ET 47
Width/ J: F 7.5J, R 9J
Diameter: 17"
Tyres: No
Set of Satin Black Cup 1 wheels for sale. These came with the car (bought Oct '13) and were refurbed and painted in May 2014 by Exelwheels (Lepsons) at a cost of £450. They have done less than 5k miles.
They come with a set of genuine Porsche metal centre caps, painted satin black to match by Exel (£130).
They haven't touched a curb or anything. The only marks on them are from fitting and removing one set of tyres, and one puncture. The tyre fitter tried very hard to be careful, so fitted a plastic rim protector tool which unfortunately had a screw embedded in it resulting in the only damage. This is barely seen with a tyre fitted and is about the size of the valve head.
These are 17" diameter. Front 7.5J ET52 & Rear 9J ET47
Offers around £600. Send me a PM. The wheels are boxed, would prefer cash on collection from Andover, Hampshire.
Rennlister name: delanobe
Asking price: SOLD
Location: Belgium
Will ship to: Worldwide
Ad Link:
Condition: As new as it gets
Wheel make: BBS E88
Wheel mode: BBS E88 motorsport
Offsets: ET 52 front + ET 47 rear
Width/ J: 8J + 9.5J
Diameter: 18'
Tyres: Yokohama AD08r
Custom centre caps with bbs logo
Wheels and tyres have been used for 1200km and are as good as new. Zero scratches etc...
Front: 8.5J x 18 with a ET61
Rear: 9.5J x 18 ET48.3
Excellent condition - Painted gloss back with red lips
There are some small chips in the red lips but no curbing. One wheel has a few chips in the black paint but nothing major. I imagine most people would refinish the wheels to their own liking, however they are painted nicely enough that if you like the colorway you could run them as-is. There are no bends or damage from what I can tell. Porsche center caps painted to match. I would consider trades for other 17" or 18" wheels in 964 NB fitment!
Hi,
Been allover the place for rims, i was able to fit PAG 15" but the offset is way off.
7's @ ET23 and 8's @ ET10,
Up until today the only fit i found was the D90's.
7×16 ET55 (running 993 turbo disc & calipers)
8×16 ET52
as this is a "rims, wheels" page, i would like to kindly ask is there anybody out there who knows of an alternative.
By the way factory 16" 993 wheels dont fit.
Thanks,
Ludwig
Bumping an old thread, but I thought the original idea was a good one.
I'm actually a buyer looking for a set of 18" wheels for my 964. Currently have a set of OEM Cup 1s on it, but I'd like to mix it up a bit. I also have a set of 17" Work Brombachers with black centers and polished lips.
Ideally, I'd like to find a set that looks like 18" supercups with painted centers or 18" speedlines 3.6/Veloce 3.6/Keskin KT2. If you've got something interesting, please PM me.
Bumping an old thread, but I thought the original idea was a good one.
I'm actually a buyer looking for a set of 18" wheels for my 964. Currently have a set of OEM Cup 1s on it, but I'd like to mix it up a bit. I also have a set of 17" Work Brombachers with black centers and polished lips.
Ideally, I'd like to find a set that looks like 18" supercups with painted centers or 18" speedlines 3.6/Veloce 3.6/Keskin KT2. If you've got something interesting, please PM me.
Thanks,
Jon
Jon. Where are you based? I have some veloces that need refurbing.
I can source new bolts etc.
Please send me a pm if interested.
G
Bumping an old thread, but I thought the original idea was a good one.
I'm actually a buyer looking for a set of 18" wheels for my 964. Currently have a set of OEM Cup 1s on it, but I'd like to mix it up a bit. I also have a set of 17" Work Brombachers with black centers and polished lips.
Ideally, I'd like to find a set that looks like 18" supercups with painted centers or 18" speedlines 3.6/Veloce 3.6/Keskin KT2. If you've got something interesting, please PM me.
Thanks,
Jon
do a search with my handle. i think you will find what you want
Likewise, I am the owner of a 93 964 Coupe looking for a set of 18"x8"(F) + 18"x9.5"(R). considering Brombachers, Speedlines 3.6/Veloce 3.6/Keskin KT2, Rotiform FUC. Do PM me if you have anything interesting!
Hi,
I have mounted Fuchs 17"
Prefer small rims large tires. 18 inch is too big for my taste.
this accept the D90 16" is all that fits over the big calipers.
Thanks,
Ludwig
03-20-2015, 07:32 AM
