964X33

My OBC has stopped providing any data and now has a flashing 'P' in the top left hand corner.
Does this mean it is 'Phucked'??? Any known Phix?

John McM

Jason, which car is this on?

BTW: Did I ever send you the links to the manuals?

964X33

John, The turbo. And no, PM me. Thanks mate.

John McM

Jason, I emailed you at Xtra.

machisono

I too have a flashing P on my 1991 C2 and have not been able to stop this annoying letter of the alphabet.

marquo

I have the same issue in my 964 targa 92. When I disconnet the battery and I connet again, I start the engine and the OBC shows "P" and there aren't any change meanwhile I keep engine started. Once I stop the engine and I start again, OBC remains off, I mean, the display is black . Someone could tell me what's the meaning and how to manage ?

BigMikeATL

My OBC just reads "0.0" and non of the functions work. After much searching, I've come to find out it is a bad OBC. Mine is from a 5sp and not a Tip. North Hollywood Speedo wants $650 to fix it.

marquo

may be NZ964C4 from New Zealand, who start the topic, can help us.... I dont like to see that "P" looking me meanwhile I'm driving

BigMikeATL

Which is really weird because I don't think the Turbo 964 came with a Tip.

g60pops

No tip but they came with an OBC which also gives a boost reading

marquo

any idea how to avoid a "P" in the display of ours OBC ?

964X33

No, I can't help with the "P" sorry which is why I asked. It sounds like it is not uncommon but nobody has a n easy Phix.

marquo

So, may be we can start to disassemble and review connexions. may be some socket has any plug not fully connected. it's an idea...

John McM

Jason, don't you have your C4? If so you should be able to switch them over and isolate the issue to the gauge or the input circuit.

marquo

hello John, I don't understant your propposition, if you mean to switch my OBC with the OBC of NZ964C4, then we have an added issue: I'm in Paris and he is in New Zealand....