Rennlist - Porsche Discussion Forums

Rennlist - Porsche Discussion Forums (https://rennlist.com/forums/)
-   964 Forum (https://rennlist.com/forums/964-forum-59/)
-   -   Ducktail??? (https://rennlist.com/forums/964-forum/741742-ducktail.html)

jaudette3 02-20-2013 04:56 PM

Ducktail???
 
I really like ducktails:

http://www.audettecollection.com/duck.jpg

I have one that I took off a '74 Euro Carrera and I'm wondering if anyone knows if it would fit on my '91 C2 Coupe?

There's no accounting for taste. :D

Thanks,
John

deutschland-dobson 02-20-2013 05:39 PM

I like ducktails too, just wish I was brave enough to fit one!

Good luck with your search :)

Chris

Euro964 02-20-2013 06:01 PM

same here!!!

deutschland-dobson 02-20-2013 06:13 PM

Rennspeed ones are on eBay...

Feedback anyone?

Chris

Shamus964 02-20-2013 06:15 PM

Yep it will fit, but you'll need the proper brackets that they used when they put the RSA tail in place or you'll need to make your own. I'll dig up some pics etc and you'll see what I mean. The mounting location for the 964's motorized decklid is wider than the mounting location on the early decklid.

I believe mine is a either an MA Shaw or Getty Design and like any fiberglass part it needed some attention but not bad by any stretch.

Shamus964 02-20-2013 07:01 PM

Here's a pic of the bracket you'll need (red arrow). I bought a used set of brackets and hardware from an RSA or Turbo (can't recall which). The original allen head mounting bolt location is the black arrow and you can see how far inset the new location is on the early style decklid.

The bits that I needed were the (2) brackets, the (4) bolts, nuts, washers, and spacer sleeves that mount the brackets to the original decklid arms. You can (barely) see (just below the black arrow) that the outer bolt head in flat to allow it to clear the engine opening. the spacers keep the bolts from crushing the original decklid arm as the nuts are tightened.

One other item is that the ground strap needs to be run up and out of the way tight to the arm (see ziptie) to avoid fraying and grounding to the ignition coils.

http://i339.photobucket.com/albums/n...psb6878590.jpg

Here's a better pic of my duck - I have tried to pull some of the old into the new with my 964 for a somewhat retro feel without backdating. I think the ducktail REALLY compliments the lines of the 964 - plus the weight savings ain't bad either! Good luck in your quest!
http://i339.photobucket.com/albums/n...ucktailjpg.jpg

jaudette3 02-20-2013 08:04 PM

Stand Back
 
1 Attachment(s)
Shamus - I love the way that looks on your car!

I may have been unclear in my original post, but I have a fiberglass ducktail that I took off a '74 Euro Carrera I used to own and installed a metal one in its place.

The Lime Green should look great on my car. :eek:

John

Shamus964 02-20-2013 10:45 PM

:D

So do you have the brackets etc to mount it up?

jaudette3 02-20-2013 10:48 PM

Nope, don't have the brackets. Haven't started my search yet, but your input is invaluable.

John

911therapy1 02-20-2013 11:00 PM

Man Shamus makes this hard! I go back and forth whether I want to leave spoiler alone or not. The ducktail is the only one I am struggling to ignore...

h2ono- It would certainly differentiate your beauty along with the new mirrors...

Obviously I have shocks, (if I can find any for early 90), H & R Greens, (or whatever color now for street), to lower and some wheel work to do....

Shamus964 02-21-2013 12:03 AM

Grin - sorry about that! But hey, this is just a warm up on temptation for when you go to Rothsport and have to REALLY resist temptation (g).

Funny thing is, this summer I actually converted back to the powered spoiler since I couldn't decide which look I wanted. A good friend bought an SC and it had no tail so I started 'duck doubting'. Net result? While I love the look when the spoiler is down, the look when it's up just didn't rock my world, and frankly it's up most of the time when I'm driving the car so I put the duck back on. Just my preference.

Let me know if you want pics of duck vs no duck to add fuel to the fire via pm and I can get them to you. Either way the cars are beautiful!

jaudette3 02-21-2013 12:15 AM

That really sells me. The duck looks great on a 964.

John

911therapy1 02-21-2013 12:23 AM

Too late, we saw Shamus! The pictures were great. I love the rarity of your blue either way, I know when I see Sea-2 in person, it will be hard to dispute...

Shamus964 02-21-2013 12:31 AM

HA! You guys are too quick... ok ok here are the pics I removed - didn't want to just pollute the thread with pics of my car! Along the lines for installation if you decide to press on - I can take measurements of the brackets if you'd like also to aid in fabbing some up.

http://i339.photobucket.com/albums/n.../IMG_5622s.jpg

http://i339.photobucket.com/albums/n.../DSCF0694s.jpg

http://i339.photobucket.com/albums/n...takenbyBaT.jpg

Don Nguyen 02-21-2013 01:40 AM


Originally Posted by Shamus964 (Post 10240851)
Here's a pic of the bracket you'll need (red arrow). I bought a used set of brackets and hardware from an RSA or Turbo (can't recall which). The original allen head mounting bolt location is the black arrow and you can see how far inset the new location is on the early style decklid.

The bits that I needed were the (2) brackets, the (4) bolts, nuts, washers, and spacer sleeves that mount the brackets to the original decklid arms. You can (barely) see (just below the black arrow) that the outer bolt head in flat to allow it to clear the engine opening. the spacers keep the bolts from crushing the original decklid arm as the nuts are tightened.

One other item is that the ground strap needs to be run up and out of the way tight to the arm (see ziptie) to avoid fraying and grounding to the ignition coils.

http://i339.photobucket.com/albums/n...psb6878590.jpg

Who makes that bracket?


All times are GMT -3. The time now is 07:43 PM.


© 2024 MH Sub I, LLC dba Internet Brands