02m2

Agreed...thanks

k9doog

Tommy Kaira

Thanks k9
Your car looks great!

02m2

thanks....
think I will go a different direction:
1. SausageCat x2
2. BeReal x1 (as per PM)
3. Big Al HURT123 x1
4. s4magman x1
5. freedman x 1
6. PlojBravo x1
7.Streetdaddyx1
8. onboost x1
9. LPMM x1
10.james_marshall x2
11. 02m2 please cancel
12. spartansix x1
13.sleepy996 x1
14.silvertarga (1 to USA)
15. Motts x1
16. mf_rsr x 1
17. dlpalumbo x 1

npc148

What will this cost?

Madturk

Worth every penny

Tommy Kaira

I'll work out a price once I've confirmed a few tweaks.

kos11-12

Hi guys ,
Concerning the rubber angles plits , I decided to cut a little V out of the rubber, with a pair of sharp shears , it seats nicer and don't show much, I may put a tiny glue , but may live it as it is , don't want to do a mess with the glue ,
If you decide to do so ; careful , don't cut to much , just cut a tiny V of about 2/3 mm, best to do 2mm to start then take another 1mm off if needed to seat better , on a length of 7mm, make sure your shears are very sharp so it snip sharp line.
Cheers
Konstantin

MrNvgtr

I finally got mine installed. I went with the brake light and no reverse light option. I love it.

porsche mania

I seem to have disappeared from the list, back on now!

Tommy Kaira

Someone made a copy/paste error I guess. Here we go:

BlacklistRacer

Hello everyone and greetings from Malaysia! Could I please be added to the list? I am very interested in the panel with the reverse and fog lights.

I intend to fit this on my 3.2 Carrera (all-metal 964 Turbo-look conversion). I just do not know if the brackets would line up. Currently the rear 964 reflector uses the 3 mounting screws to hold it in place. That being said, I believe I do have those metal brackets behind the reflector.

Any advice is appreciated. I do hope this works for my car (pictures attached)!

P.S. I currently have reflective PORSCHE script on the original reflector. I have found this to be amazingly good for night driving. Headlight beams reflect brilliantly off the script.

djtic

Hello everybody,

I have just read the whole thread and am totally excited about this project.
Thank you Andrew to have worked so seriously and professionally on this !

You will understand that I am totally interested in it, and would go for a 3 light setup.
Under, the updated list :

1. SausageCat x2
2. BeReal x1 (as per PM)
3. Big Al HURT123 x1
4. s4magman x1
5. freedman x 1
6. PlojBravo x1
7.Streetdaddyx1
8. onboost x1
9. LPMM x1
10.james_marshall x2
11. 02m2 x1
12. spartansix x1
13.sleepy996 x1
14.silvertarga (1 to USA)
15. Motts x1
16. mf_rsr x 1
17. dlpalumbo x 1
18. porsche mania
19. eddieb4
20. Wikkid911
21. StopLookGo X 1 to South East Asia
22. itsujack x1 to Australia
23. DJTic x1 to Guadeloupe (Caribbean French West Indies)

thanks.

DJ TIC

MrNvgtr

It's really simple to check for those metal brackets. Un-screw the three tabs on top of your center reflector, pull it out, and look. Take a photo and compare to the stock 964 metal brackets. Post here if not sure. I'm not sure how the metal bracks from the various short hood generations have changed over the years, but it's easy to do this quick comparison.

81turboporsche

I would love to get in on this buy If still available, I know I am a newbie or nhis board but have been a pelican faithful for the better part of a decade!