Rear Center Light Substitution Panel
#406
The OEM panel closes off the area completely and does not allow for any air movement. The mesh panel does not have the top blocked off and creates a channel up and above the engine cross member for air to escape. If I were to drill I would open up the bottom heat shielding (the thick formed aluminium foil) instead of drilling through the frame. But, I don't think this is entirely necessary, there will be air movement thanks to the mesh panel.
Thanks!
Andrew
Thanks!
Andrew
#411
Thank you for the kind words and support all through the design and development. It has been a fun project to work on.
First kit has been shipped! I will be shipping them daily as I receive the brackets from printing and assemble them. Please look for a PM update and mounting instructions.
Thanks!
Andrew
First kit has been shipped! I will be shipping them daily as I receive the brackets from printing and assemble them. Please look for a PM update and mounting instructions.
Thanks!
Andrew
#414
Hi everyone.
It will probably be me that takes over this project from Andrew when he's finished as I was already working on something similar.
Before taking orders I'd like to get some feedback from the people who've got a SausageCat kit and make any necessary tweaks.
I'll try and keep this thread updated until I'm ready to take orders and then start a new thread. If everyone likes the quality I'd be happy to hear about any other parts you guys would be interested in. I have easy access to an SC, my 964, a 993 and a 996 so will try and adapt the reflector replacement for those if there is enough interest out there.
I just hope I can reach the bar which has been set so high by Andrew!
It will probably be me that takes over this project from Andrew when he's finished as I was already working on something similar.
Before taking orders I'd like to get some feedback from the people who've got a SausageCat kit and make any necessary tweaks.
I'll try and keep this thread updated until I'm ready to take orders and then start a new thread. If everyone likes the quality I'd be happy to hear about any other parts you guys would be interested in. I have easy access to an SC, my 964, a 993 and a 996 so will try and adapt the reflector replacement for those if there is enough interest out there.
I just hope I can reach the bar which has been set so high by Andrew!
#415
Please put me on the interest list for the next round.
Has anyone made a set of clear rear tail light lenses ?
Has anyone made a set of clear rear tail light lenses ?
Hi everyone.
It will probably be me that takes over this project from Andrew when he's finished as I was already working on something similar.
Before taking orders I'd like to get some feedback from the people who've got a SausageCat kit and make any necessary tweaks.
I'll try and keep this thread updated until I'm ready to take orders and then start a new thread. If everyone likes the quality I'd be happy to hear about any other parts you guys would be interested in. I have easy access to an SC, my 964, a 993 and a 996 so will try and adapt the reflector replacement for those if there is enough interest out there.
I just hope I can reach the bar which has been set so high by Andrew!
It will probably be me that takes over this project from Andrew when he's finished as I was already working on something similar.
Before taking orders I'd like to get some feedback from the people who've got a SausageCat kit and make any necessary tweaks.
I'll try and keep this thread updated until I'm ready to take orders and then start a new thread. If everyone likes the quality I'd be happy to hear about any other parts you guys would be interested in. I have easy access to an SC, my 964, a 993 and a 996 so will try and adapt the reflector replacement for those if there is enough interest out there.
I just hope I can reach the bar which has been set so high by Andrew!