germanspeed

hey guys will wheels with an offset of ET45 front and ET49 rear fit my stock C2 or do I need spacers?

sml

What width?
Dont need diameter btw.

germanspeed

They are 8s in front and 9s out back....sorry I forgot about that tiny detail

Makmov

should fit. I think that what mine are.

The general rule is ET 45-60 on the front and less than ET 59 on the rear.

sml

If you want a quick yes or no .. then wait for replies.

OR ..

If you'd prefer to understand the dimensions yourself then read this ...

https://rennlist.com/forums/964-foru...el-offset.html

My old cup wheels ...
Front 7 ET55
Rear 8 ET52 - really needs to be further outwards.

My new OZ wheels ..

Front 8ET50 - this is fine. minor clash on the inside at full lock but no real problems
Rear 10ET40 - this requires negative camber and a slight fender roll

With these benchmarks, measuring your own offsets & clearances, as well as the calculator then you should be able to get a good feel.

germanspeed

Thanks for the help guys....