So I stumbled across these cams......... - Rennlist - Porsche Discussion Forums

964 Forum
Sponsored By:
Sponsored By:

So I stumbled across these cams.........

Old 11-21-2007, 03:01 PM
Thread Starter
Join Date: May 2005
Posts: 1,934
Default So I stumbled across these cams.........

Bought a set of cams from a fellow lister and I am very happy with the purchase.

These were installed in a 3.8 engine build I did 13 years ago. They might have 3,000 kms on them at the most. The car went like a raped ape when it was on the cams.....but took practice to drive slowly in traffic !!!!

What I remember is that we bought them from Dave T. at Andial in 1994 and they obtained them in Germany, probably from PAG......

FWIW have found out the following info to date so we can set them up........

330 degrees at .050
3.25mm lift @ tdc

930.105.142.1R and 5557 are one of the shafts.....with corresponding numbers on the other. These come up in PET as 1975-77 Turbo and 1978-1983 that is maybe what the blanks were.

We've got a call in to Dave and he'll get back to us on what records are still in his posession, but I'm still looking for any and all opinions on what these cams possibly in their application......Cup Car, RSR, Don't exist, etc......
YYC930 is offline  
Old 11-21-2007, 07:08 PM
Super User
Geoffrey's Avatar
Join Date: Dec 2001
Location: Kingston, NY
Posts: 8,302

they don't have 330 degrees at .050, that is not a good spec on the cams, you should relook at them.
Geoffrey is offline  
Old 11-22-2007, 11:13 AM
Thread Starter
Join Date: May 2005
Posts: 1,934

That is what we were told by someone..........found out it is too high based on info I saw during a search I did here........most cams are around 250-260 degrees.
YYC930 is offline  

Thread Tools
Search this Thread

Contact Us About Us Advertising Cookie Policy Privacy Statement Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.
  • Ask a Question
    Get answers from community experts
Question Title:
Your question will be posted in: