Dopke Lowering Perches
07-06-2001, 06:19 PM
#1
Advanced
Thread Starter
Join Date: May 2001
Location: Corona CA
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Dopke Lowering Perches
All of you out there with 964's and 993's this is THE ticket for lowering your car ! Easy, inexpensive and it works.
I used these on my car and it brought it down 2" in the front and 1 3/4" in the rear.
Combined with the M030 springs you get a lowered car with great handling for a lot less than a coil over set.
I have no connection to Clay other than a lot of respect for his products and the way he runs his business.
Here is a copy of his post on the Rennlist.
<< Hi All,
Without going into a long drawn out story, my machinist who makes products for me, just called and informed me that my 20 sets of spring perches are finished. Unfortunately, last time we spoke, he informed me it
would be MONTHS before we would see them. At that point I told him 'forget it'. Well, needless to say, they are enroute as we speak. I have made arrangements to sell the excess to a wholesaler in Germany, so, IF ANYONE WANTS SETS OF THESE, NOW IS THE TIME TO GET THEM AS IN ONE WEEK THEY WILL BE
GONE. THERE WILL BE NO MORE MADE BY MY MACHINIST.
Set of 4........2 front 2 rear for 964 C2/C4 and 965 $ 375.00
Set of 2........2 front for 993's........$199.95
This is your last chance to obtain these from us as I WILL NOT do another
production run.
Clay Dopke
dopke/design
1-601-679-1847>>
I used these on my car and it brought it down 2" in the front and 1 3/4" in the rear.
Combined with the M030 springs you get a lowered car with great handling for a lot less than a coil over set.
I have no connection to Clay other than a lot of respect for his products and the way he runs his business.
Here is a copy of his post on the Rennlist.
<< Hi All,
Without going into a long drawn out story, my machinist who makes products for me, just called and informed me that my 20 sets of spring perches are finished. Unfortunately, last time we spoke, he informed me it
would be MONTHS before we would see them. At that point I told him 'forget it'. Well, needless to say, they are enroute as we speak. I have made arrangements to sell the excess to a wholesaler in Germany, so, IF ANYONE WANTS SETS OF THESE, NOW IS THE TIME TO GET THEM AS IN ONE WEEK THEY WILL BE
GONE. THERE WILL BE NO MORE MADE BY MY MACHINIST.
Set of 4........2 front 2 rear for 964 C2/C4 and 965 $ 375.00
Set of 2........2 front for 993's........$199.95
This is your last chance to obtain these from us as I WILL NOT do another
production run.
Clay Dopke
dopke/design
1-601-679-1847>>
