How to lower a 964 C4?
 

What are my options for lowering my car?

Dear Rick,
I highly recommend you get hold of a copy of the three part article called Wringing Out a Carrera 4. It was published in Excellence, April, Sep and Dec 1992. Well worth a read and tells you everything you can do and what the affects are.
To see the end result check out at web site http://Porsche911.isuisse.com click on rennlsiters, then tech articles then Adrians C4 goes low.
The photos of my lowered C4 are as per the recommendations in these articles. I used EIBACH Springs (964RS) and a full set of KONI Sports Struts and Shocks. Plus a few other little goodies. If changed from the article only in the wheels department. I installed 911 (964) Turbo 17 inch wheels,
Ciao and good reading,
Adrian.

PS: I do not recommend you install H&R Lowering springs on their own. Besides they do not stiffen the ride much on their own anyway.

Adrian; a "side" question. In America, there's this rubber "block" between the blinkers and driving lights. On the European cars, there appears to be a lens or some piece of plastic there. Is that a light of some sort, or a reflector? Anybody ever changed that rubber block to whatever it is there in Europe or is it a bit of a timely project? :rolleyes:

On the European cars this is just a small reflector, clear plastic, nothing else. Not sure if you can just swap on a US car.