The For Sale/Trade/Wanted thread *Posting by paying Members only*! PRICES NEEDED.
03-25-2013, 01:15 PM
#2326
Rennlist Member
I just checked my old studs i replaced the overall length was 49mm the length from the inside of the lip to the end of the stud was 47mm. I am interested in selling but would prefer to sell them as a set of 20.
03-25-2013, 01:39 PM
#2327
Racer
Join Date: May 2005
Location: SF Bay Area
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Bought this from a fellow Rennlister but never got a chance to try it out before selling the car.
It's got all four clips, the drilled top and the K&N filter. Will leave it up here a few days before putting it on ebay.
This will fit a 964 for sure and possibly a 993, but I can't confirm the 993. Maybe someone else knows. Looking for what I paid, which is $65. Local pickup in Sherman Oaks, CA or shipping is about $10 depending on where you live.
It's got all four clips, the drilled top and the K&N filter. Will leave it up here a few days before putting it on ebay.
This will fit a 964 for sure and possibly a 993, but I can't confirm the 993. Maybe someone else knows. Looking for what I paid, which is $65. Local pickup in Sherman Oaks, CA or shipping is about $10 depending on where you live.
03-28-2013, 05:13 PM
#2328
FS: 18x10 et47 Turbo Twist wheels 964 fitment
or Sale: 2 rear 18x10 et 47 turbo twists (new, unmounted) aftermarket wheels. This fitment should work great on a 964. Also, may work on other cars.
$400 for the pair plus $65 shipping in the U.S.
$400 for the pair plus $65 shipping in the U.S.
04-01-2013, 11:49 PM
#2329
Three Wheelin'
Join Date: May 2005
Location: Reston, VA
Posts: 1,339
Likes: 0
Received 0 Likes
on
0 Posts
I have both the rear spoiler control module (911.618.112.00) and the spoiler control switch housing (964.552.071.03.1DB), **** (964.613.171.00.01C), and electrical output doodad (964.613.162.00). Both were taken out of my 964 in fully functioning condition when I switched to a fixed rear wing. The module is $410 new from Pelican and the switch is $388 all together. I would like to get $200 shipped in the US for the spoiler control module and $150 shipped for the switch.
Thanks!
Thanks!
04-09-2013, 09:52 PM
#2331
Three Wheelin'
Join Date: May 2005
Location: Reston, VA
Posts: 1,339
Likes: 0
Received 0 Likes
on
0 Posts
Guys, I'm going to sell my H&R street performance coilover setup. Used for about 15k miles. Shocks still have plenty of life left in them. These are a good compromise for street & track and allow full adjustment and tuning of your ride height. Selling because I've caved in to trying KwV3's at $3000 
I cut a slit into the brake line mounts on these so as to avoid having to break open the brake lines (and thus go through the whole bleeding process right after I'd done a flush).
These go for $1980 new from Tire Rack, I'd like to get $1200 + shipping. Please note I am keeping them installed on my car (that I'm not driving) until someone buys because i can't afford to buy V3s until I sell these, and can't leave my car up on jack stands in my complex's underground parking garage for more than a couple days until someone says something...
I cut a slit into the brake line mounts on these so as to avoid having to break open the brake lines (and thus go through the whole bleeding process right after I'd done a flush).These go for $1980 new from Tire Rack, I'd like to get $1200 + shipping. Please note I am keeping them installed on my car (that I'm not driving) until someone buys because i can't afford to buy V3s until I sell these, and can't leave my car up on jack stands in my complex's underground parking garage for more than a couple days until someone says something...
04-09-2013, 11:28 PM
#2332
04-10-2013, 01:00 AM
#2333
Race Car
Guys, I took some pics awhile back of a factory tool kit that came in my 964. I carried it around for about a year then wrapped it up and stored it, along with several other items, as you may know.
Anyway, it is in excellent condition, no rust, complete and the only screw up I did was put a tie wrap around the vinyl storage sleeve. I'd like to get $200 plus shipping for it. ***SOLD***
***Factory tow hook is not pictured, but is included...excellent condition/unused, had it hanging on a peg board.
TOOL KIT HAS BEEN SOLD - THANKS RENNLIST!!
Anyway, it is in excellent condition, no rust, complete and the only screw up I did was put a tie wrap around the vinyl storage sleeve. I'd like to get $200 plus shipping for it. ***SOLD***
***Factory tow hook is not pictured, but is included...excellent condition/unused, had it hanging on a peg board.
TOOL KIT HAS BEEN SOLD - THANKS RENNLIST!!
Last edited by Jeff Curtis; 04-11-2013 at 01:32 AM.
04-10-2013, 01:08 AM
#2334
Race Car
Recently the buyer backed out on my 16" spare. This is a factory spare that usually came with 964 Turbos and I believe an option for NA 964. It is in excellent/unused condition and is designed to fit over BIG Red calipers, which generally require a 17" wheel.
I'd like to get $150 plus shipping.
I'd like to get $150 plus shipping.
04-10-2013, 11:02 PM
#2335
Instructor
Join Date: Jan 2008
Location: Calgary, AB
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
I have a B&M short shifter that I would like to sell for $150 + shipping.
Bought it about a year ago and didn't install it. The shift fork uses the same 4 plastic bushings as the stock assembly. You will either need to reuse these or replace them, part #999 924 002 40.
Bought it about a year ago and didn't install it. The shift fork uses the same 4 plastic bushings as the stock assembly. You will either need to reuse these or replace them, part #999 924 002 40.
04-11-2013, 12:14 AM
#2337
AutoX
Join Date: Nov 2005
Location: Carmichael, CA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Guys, I took some pics awhile back of a factory tool kit that came in my 964. I carried it around for about a year then wrapped it up and stored it, along with several other items, as you may know.
Anyway, it is in excellent condition, no rust, complete and the only screw up I did was put a tie wrap around the vinyl storage sleeve. I'd like to get $200 plus shipping for it.
***Factory tow hook is not pictured, but is included...excellent condition/unused, had it hanging on a peg board.
Anyway, it is in excellent condition, no rust, complete and the only screw up I did was put a tie wrap around the vinyl storage sleeve. I'd like to get $200 plus shipping for it.
***Factory tow hook is not pictured, but is included...excellent condition/unused, had it hanging on a peg board.
04-14-2013, 06:16 PM
#2338
18x8.5 OEM BBS Turbo Twist II wheels with 18x10 aftermarket rears
Ultimate wheel combo for a 964. These are the ultra rare 18x8.5 front wheels from a 996 GT2: 996.362.136.31 18x8.5 ET 40
Combined with a pair of aftermarket 18x10 et47 rears.
The front BBS are near perfect and the rears are new/never mounted.
$1,250 for the set.
Pictures will be posted soon. Rennlist does not seem to be accepting uploads at the moment.
Combined with a pair of aftermarket 18x10 et47 rears.
The front BBS are near perfect and the rears are new/never mounted.
$1,250 for the set.
Pictures will be posted soon. Rennlist does not seem to be accepting uploads at the moment.
04-14-2013, 07:46 PM
#2339
Three Wheelin'
James - PM sent.
