C H

I'm looking for:

C4 spoiler/AWD lock console switch, plus wiring harness(for spoiler part)
Wiring harness from sport seat to floor

agentpennypacker

I'm looking for:

- Cat Bypass (not primary muffler bypass)
- PSS9 or like adjustable suspension
- 4-piston rear calipers in good shape

I will have some H&R RSA/Turbo lowering springs (good for C2/C4 also) soon. Hardly used.

chancecasey

I'm looking for:

used complete 3.6 turbo exhaust system with heat exchangers - minus the turbo, waste gate, and muffler.

doesn't hurt to ask

JW in Texas

I finally got around to doing the Big Red swap on the widebody so now I have (2) pair of stock front 964 calipers if anybody needs a pair.

burgass

Agentpennypacker you got PM

agentpennypacker

Got you back Burg - you can call me at home if you'd like at 913.766.3834. I'll be home around 7:45pm PT (9:45 Central).

ALSO:

I still need a CAT BYPASS guys - having no luck here!


Chris

craig001

Chris,

I have a set of H&H front struts/springs froma 965. After talking with my wrench I think Iam just going to put my M030 parts on the car. I am concerned the H&R's would be too stiff/harsh for my use (85% street).

JW in Texas

Chris,
I have had the H&R set-up on my car since I got it. They were installed by the previous owner. I did DE it some early on but now it's strictly street only. I really like the set-up & I wouldn't consider it overly stiff at all. Just my 2 cts.

Marc Shaw

Chris,

Christer has an H&R set-up too and has commented before it was not too stiff for street use (I'm imagine he'll chime in if I am incorrect).

Marc

agentpennypacker

Thanks guys. I have H/R springs with stock struts right now - still WAY too soft. If you guys have anything that's pretty harsh, then please let me know!

hawk911

from my limited seat time with H&R and bilstein setup; it's not too harsh at all. My wife can still ride in the car, so it can't be that bad

Tinwan

Hi all,
This is what I have if anyone is any interested. Vitesse 1:43 964 Cup Cars from the French & German series that were made in Europe. I have been collecting for years and I have duplicates of some in my collection & for some reason 964's were always hard to find.

Check them out here if your interested thanks.

http://uk.pg.photos.yahoo.com/ph/gor...SLGZEBE8plQh_e

Cheers, Mark

Kavo

I have some parts that you may be interested in. I’ll send pictures on request. Some of this stuff will be on eBay soon. ed.kavo@verizon.net

-Air bags driver and passenger side
-C2 steering wheel
-Steering wheel switches C2 with cruise control
-Floor board for driver side pedals
-Stock speaker grills front and rear
-C2 gauges
-C2 lower dash pad
-Rear passenger side oil line –Flat type
-Stock Luk Flywheels 964.114.012.01 -2
-C2 pressure plates Sacs Type GMFZ 240 3032125199 -2
-Stainless steal tailpipe aftermarket– round
-Stock primary and secondary Mufflers
-Flexible heater ducts – from heat exchangers
-Eibach springs 8” length 2.25” diameter
0800 225 0400 - 2
0800 225 0600 – 2
0800 225 625 – 1
-Rear tail light driver side
-RS America lightweight jack 000.721.711.00
-Front inner wheel liner 964.504.303.00
-Floor mats with Porsche logo 4
-Front speaker door pockets
-Rear emergency brake shoes 4
-Square interior air vents

Diverwes

Wow lots of stuff to buy. I will have to go throught mine and part it all out

jaboc03

I am looking for some clear bumperettes to buy. I can't stand looking at the ugly black plastic that we get here in the U.S. any longer.