fastmd

I have this cable with plug an it’s not connected to anything. Does anyone know what it’s for and should it be connected?

thanks!

jonathant

That’s for the flux capacitor. NLA but you can find rebuilt units sometimes if you search.

fastmd

thx, maybe you can send me yours off the delorean.

Looking for something a little little more useful.

Rtz

It’s difficult to tell from the close ups. Maybe post another photo that shows what area the connector is located.

xdecock

What about

The differential Control Button bridging

Pin 1 is Red grey (term 5 of abs relay, abs controller pin 1, diff lock "on" position 1)
Pin 2 empty
Pin 3 grey blue (abs controller pin 28, diff lock "in" pin 1)
Pin 4 brown (ground obviously, diff lock "off" via shell 5)

Plus female plug on schematics

Not sure what purpose it fullfill but it's noted as empty

F38 in electrical schematics (90)

xdecock

It's probably more a diagnostic tool close to the abs than anything or a way to plug a remote button to diagnose from under the car altough most people never knew avout it

fastmd

Thank you!