Will an 18x10” ET36 fit a narrow-body 964?
#1
Rennlist Member
Thread Starter
Will an 18x10” ET36 fit a narrow-body 964?
On a moderately lowered car (lower than stock, but not slammed).
I’m guessing it won’t....
How about an 18x9” ET46?
Thanks guys!
I’m guessing it won’t....
How about an 18x9” ET46?
Thanks guys!
#2
Advanced
That's a 18x10 with +45mm. Fairly low. 36 is pretty aggressive for sure but if you could shave off 4-5mm on the backpad you could probably make it work.
No problem 18x9 +46
#3
Rennlist Member
Yes it will, with rolled fenders and some negative camber. I'm running 18 x 10 et35, 3" lip...
#4
Phfwoa that dish on the rear wheels looks bad ****
#6
#7
Rennlist Member
Thanks, 18 x 8.5 et39, 1" lip.
Trending Topics
#8
Racer
#10
Rennlist Member
Thread Starter
#11
Rennlist Member
#12
Rennlist Member
#13
Racer
#14
Rennlist Member
Both are great options. From a custom wheel standpoint, Rotiform has numerous fitments under their belt for 964's. I'm sure they can advise you based on what you're looking to accomplish.
#15
Thanks all! I'm still doing my research when it comes to this car's fitment. I have the 17x8 and 17x9 RUF Speedlines with 15mm spacers and am looking to get a new set of wheels possibly the standard BBS RS or Rotiform wheels.