CPR Classic..Fallbrook CA
Has any one had an experience with this shop in N. Sand Diego county?
http://cprclassic.com/contact.html |
I have no personal experience with them but hear good things about them.
|
Originally Posted by 02m2
(Post 14907792)
Has any one had an experience with this shop in N. Sand Diego county?
http://cprclassic.com/contact.html |
Originally Posted by il pirata
(Post 14908807)
Yes. They can do great work and are not cheap. Focused primarily on 356 and early 911 models.
|
Originally Posted by 02m2
(Post 14909140)
thanks...have a call into them. I don’t care if it is expensive as long as they do a good job and don’t take forever to get it done. |
You could call Henry Schmidt at Supertec Performance in Fallbrook to pick his brain. He's a reputable engine builder and probably knows these guys. I think mainly hangs out on the Pelican forums.
|
Originally Posted by il pirata
(Post 14909272)
Is this work for a 964?, is this full glass out same color or?, any metal work?
|
Originally Posted by 964Q
(Post 14909619)
You could call Henry Schmidt at Supertec Performance in Fallbrook to pick his brain. He's a reputable engine builder and probably knows these guys. I think mainly hangs out on the Pelican forums.
|
Talked with CPR today. Exterior respray, glass out..no fronk or engine compartment .....wait time in q: 6 months and $45k. They say they have 40k sq ft and 50 cars ahead of me. |
$45K for a paint job, yikes! It’s been a while since I researched paintwork, have prices really gone up that much for quality work? |
Wow that seems crazy.... does the car need a lot of body work..... $5,000 in materials,,,, $100 an hour for labor is 400 hours or at $150 an hour that 266 hours....... somebody please tell me this is not a real estimate and that a very nice paint job would cost around $20,000...... |
There towards the high end, BUT they are very good at single stage paint work.
They prefer a total redo, so a partial redo will get priced higher, parts in the past where a pass though, it's all about the labour. OP where are you city wise? |
Originally Posted by CBA
(Post 14914795)
Wow that seems crazy.... does the care need a lot of body work..... $5,000 in materials,,,, $100 an hour for labor is 400 hours or at $150 an hour that 266 hours....... somebody please tell me this is not a real estimate and that a very nice paint job would cost around $20,000......
|
i dont kow much about so cal.
but if i charged 45k per car with no metal work, and there are 50 cars ahead of you... i think i will go steal their tech, pay them 2x and start my own shop |
45k. Are they effing high? thats a “we have too much work but if this guy will pay it we won’t turn down his cash” price. In other words. They don’t want the business. |
All times are GMT -3. The time now is 01:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands