My 964
#31
Rennlist Member
Love the side profile shot above. The Fuchs and wing really make it unique.
I tore my sound pad out years ago. Didn't notice much difference. Have been hesitant to cut the studs off, maybe one day. (They are not as noticeable since my car is Slate Grey).
Just noticed you don't have any engine bay stickers?
I tore my sound pad out years ago. Didn't notice much difference. Have been hesitant to cut the studs off, maybe one day. (They are not as noticeable since my car is Slate Grey).
Just noticed you don't have any engine bay stickers?
#32
Rennlist Member
Dingo,
Car is looking great, and it looks like you are having a ball (great summer too). I removed my sound pad, it was doing nothing besides snowing crap onto the motor as it was so tired. It certainly looks a lot tidier without the sound pad hanging down. However, I would think long and hard about cutting off the studs. Once they are cut off, they are gone, difficult to reverse engineer. When I drop the engine (as you do) that is maybe the time to refit the sound pad, and the look back to stock. The option of keeping the studs still exists for you or the next owner. Just saying, your car, enjoy.
S
Car is looking great, and it looks like you are having a ball (great summer too). I removed my sound pad, it was doing nothing besides snowing crap onto the motor as it was so tired. It certainly looks a lot tidier without the sound pad hanging down. However, I would think long and hard about cutting off the studs. Once they are cut off, they are gone, difficult to reverse engineer. When I drop the engine (as you do) that is maybe the time to refit the sound pad, and the look back to stock. The option of keeping the studs still exists for you or the next owner. Just saying, your car, enjoy.
S
#33
Rennlist Member
Looks awesome! I agree with Spokes, keep the studs. Deleting the rear blower motor next would really open things up back there.
Keep up the good work!
Keep up the good work!
#34
Three Wheelin'
Thread Starter
Love the side profile shot above. The Fuchs and wing really make it unique.
I tore my sound pad out years ago. Didn't notice much difference. Have been hesitant to cut the studs off, maybe one day. (They are not as noticeable since my car is Slate Grey).
Just noticed you don't have any engine bay stickers?
I tore my sound pad out years ago. Didn't notice much difference. Have been hesitant to cut the studs off, maybe one day. (They are not as noticeable since my car is Slate Grey).
Just noticed you don't have any engine bay stickers?
#35
Three Wheelin'
Thread Starter
Dingo,
Car is looking great, and it looks like you are having a ball (great summer too). I removed my sound pad, it was doing nothing besides snowing crap onto the motor as it was so tired. It certainly looks a lot tidier without the sound pad hanging down. However, I would think long and hard about cutting off the studs. Once they are cut off, they are gone, difficult to reverse engineer. When I drop the engine (as you do) that is maybe the time to refit the sound pad, and the look back to stock. The option of keeping the studs still exists for you or the next owner. Just saying, your car, enjoy.
S
Car is looking great, and it looks like you are having a ball (great summer too). I removed my sound pad, it was doing nothing besides snowing crap onto the motor as it was so tired. It certainly looks a lot tidier without the sound pad hanging down. However, I would think long and hard about cutting off the studs. Once they are cut off, they are gone, difficult to reverse engineer. When I drop the engine (as you do) that is maybe the time to refit the sound pad, and the look back to stock. The option of keeping the studs still exists for you or the next owner. Just saying, your car, enjoy.
S
#36
Rennlist Member
I think you're right, they seem invisible in my car so I left them. Plus I'm lazy and not talented so didn't want to go to the next step. You're much more industrious than me.
Not important at all. I actually like the clean look. Make it your own!
When I got the car all the engine bay stickers were peeling or completely faded so I took them off, and then panicked about them later after they were long gone! They arn't important are they? Cheers
#37
Three Wheelin'
Thread Starter
#38
Rennlist Member
You can take the snorkel off. Easily disconnects from the air box if you want to experiment with the look. Twists right off.
Is the airbox cover stock, or has it been Swiss cheesed?
Is the airbox cover stock, or has it been Swiss cheesed?
#39
Three Wheelin'
Thread Starter
Oh sweet I feel the same, love to see nothing but a car, wheels and an engine!
#40
Three Wheelin'
Thread Starter
I was think even more radical! Like something to tidy things right up. I've seen people with a pod there but can't find any information on them. I did notice when I took it off yesterday that someone had drilled about a dozen small holes in the cover 😐
#41
Three Wheelin'
Thread Starter
Wof
Just went for it's 6 monthly warrant of fitness or wof! Passed with flying colours! Sat in the waiting room cringing and sweating for half an hour while some stranger drove and played around with my pride and joy 😐
#42
Rennlist Member
sorry for the late reply. We had a blizzard here today and I've been behind another kind of air cooled engine blowing snow all day.
I also dont don't like the look of the 964 snorkel. 993's have an optional sport box with a bit of chrome to spruce up the engine bay.
One alternative is the Evo Hi Flow Cold Air Intake. Looks great, but some have voiced concern over the location drawing hot air.
http://www.eagleday.com/964evohicoai.html
Evo
Another alternative if you like carbon is the RS style which retains the snorkel height https://www.design911.co.uk/mobile/#part;id=7571
RS style duct (replica)
And not that anyone can really see the side of the airbox, but I really didn't care for much for the Swiss cheese look. I ran across a photo of a box with the entire side cut out, and that was my inspiration. Quick work with a dremel.
when will Rennlist fix the photo bug?
#43
Three Wheelin'
Thread Starter
Hey Dingo,
sorry for the late reply. We had a blizzard here today and I've been behind another kind of air cooled engine blowing snow all day.
I also dont don't like the look of the 964 snorkel. 993's have an optional sport box with a bit of chrome to spruce up the engine bay.
I think there is far too much clutter in the engine bays of these cars! Thanks heaps for the detailed reply. I have decided on the direction I wanto head. I really like the tidy and simple look of the pod filter tucked away up the back. Tidys things right up. Surely there would be so much air blown around under the hood that no matter what you do you would suck a bit of hot Air!
I think I'll pull the Air box off tomorrow and make a template of the Air flow meter and make an adaptor myself and grab a pod filter. Back at work on Monday ☹ so will be a nice project for next weekend!
Cheers 👍
#44
Three Wheelin'
Thread Starter
Keyring!
Keyring turned up today!