FS Delphi 55lb injectors (low-impedance)
05-26-2017, 01:00 AM
#1
Rainman
Rennlist Member
Rennlist Member
Thread Starter
FS Delphi 55lb injectors (low-impedance)
Set of 4 used but good shape Delphi 55lb (580cc) injectors. MFR PN# 17113841 (etched on top of the injectors themselves).
I drove with them (dialed in) for about a year, they were great. They are multi-hole type rather than stock 944 pintle - better spray pattern for smoother idle and better fuel mixing under power. They are a direct fit physically into 944/951 intake manifold and fuel rail along with harness plug. However, in a 944 turbo you will need to add ~3 ohm ballast resistor to keep the DME happy.
I am going with a different style injector so don't need these anymore.
Around the web these are about $53 apiece + shipping.
Would like to get $180 shipped for the set, open to offers.
I also have 75lb versions of the same injector for sale here:
https://rennlist.com/forums/944-turb...l#post14212114
Generic photo:
I drove with them (dialed in) for about a year, they were great. They are multi-hole type rather than stock 944 pintle - better spray pattern for smoother idle and better fuel mixing under power. They are a direct fit physically into 944/951 intake manifold and fuel rail along with harness plug. However, in a 944 turbo you will need to add ~3 ohm ballast resistor to keep the DME happy.
I am going with a different style injector so don't need these anymore.
Around the web these are about $53 apiece + shipping.
Would like to get $180 shipped for the set, open to offers.
I also have 75lb versions of the same injector for sale here:
https://rennlist.com/forums/944-turb...l#post14212114
Generic photo:
Last edited by V2Rocket; 11-30-2020 at 09:35 AM.
11-30-2020, 07:17 AM
#4
1st Gear
Join Date: Nov 2020
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
