WTB 3rd gear and other transmission parts
#1
Drifting
Thread Starter
WTB 3rd gear and other transmission parts
My transmission is in for a rebuild and they phoned me to tell me that I need a few more parts.
3rd gear (25 tooth) from turbo or S2.
3-4 synchro slider (hub)
1-2 shift fork
I'd rather put in new parts, but I can't find any in north america. The dealer can get them to me, but at a steep price and they can't source the 1-2 shift fork. What are the odds that used parts would be ok? I don't want to get laughed out of the shop by bringing in junk
3rd gear (25 tooth) from turbo or S2.
3-4 synchro slider (hub)
1-2 shift fork
I'd rather put in new parts, but I can't find any in north america. The dealer can get them to me, but at a steep price and they can't source the 1-2 shift fork. What are the odds that used parts would be ok? I don't want to get laughed out of the shop by bringing in junk
#2
Rennlist Member
I can provide these as good used parts, or as new parts (except for the 1/2 shift fork, would have to order it). Assume you want the floating 3rd gear on the input shaft, not the fixed 3rd gear on the pinion shaft. PM me.
#3
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
I have a 1986 5P Gear set with only 61K miles $ 349.99 plus shipping
#5
Advanced
Join Date: Mar 2010
Location: Vancouver, Canada
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
My transmission is in for a rebuild and they phoned me to tell me that I need a few more parts.
3rd gear (25 tooth) from turbo or S2.
3-4 synchro slider (hub)
1-2 shift fork
I'd rather put in new parts, but I can't find any in north america. The dealer can get them to me, but at a steep price and they can't source the 1-2 shift fork. What are the odds that used parts would be ok? I don't want to get laughed out of the shop by bringing in junk
3rd gear (25 tooth) from turbo or S2.
3-4 synchro slider (hub)
1-2 shift fork
I'd rather put in new parts, but I can't find any in north america. The dealer can get them to me, but at a steep price and they can't source the 1-2 shift fork. What are the odds that used parts would be ok? I don't want to get laughed out of the shop by bringing in junk
#6
Rennlist Member
I blew my tranny too. It was third gear as well. I sent a bunch of gears left over after the build from two tranny's to Lart. Louis, I never heard if you ever received the delivery. Did you ever get the stuff?
#7
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Yes, Joe I did get it I believe I sent you a message back them, that time was when I was under the Bell's scandal storm. Thank you
Trending Topics
#9
Advanced
Join Date: Mar 2010
Location: Vancouver, Canada
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
3rd gear (25 tooth) from turbo or S2.
3-4 synchro slider (hub)
1-2 shift fork
I Have all of the above. However, the 3rd gear I would say is in fair condition. The rest are fine. Do you need just the fork without the shaft and dowel pins? Do you need all of the pieces to the synchro hub? or can you reuse the springs and the three detent pieces?
3-4 synchro slider (hub)
1-2 shift fork
I Have all of the above. However, the 3rd gear I would say is in fair condition. The rest are fine. Do you need just the fork without the shaft and dowel pins? Do you need all of the pieces to the synchro hub? or can you reuse the springs and the three detent pieces?
#10
Drifting
Thread Starter
Thanks for the offers to help guys. Kevin Gross was able to find these parts in really good condition. Hopefully this is all the transmission needs to come back to life.