Square or Staggered tyre setup?
It's about time i put my enkei nt03 wheels on..
And for some reason, I really want to give the Achilles 123s a try. I've heard so many good things about these 'cheaper' tyres, I know a few people who swear by them and the Formula Drift guys love these things. Wheel size: 8.5" x 18 10 x 18 But they're limited in sizes.. Ideally i want 8mm thread depth.. 265/35R18 (8mm tread depth) 255/35R18 (4mm tread dept), I think they come in 8 also 235/40R18 (8mm thread depth) i was thinking 265 square setup. Thoughts? |
Originally Posted by Paulyy
(Post 12045173)
It's about time i put my enkei nt03 wheels on..
And for some reason, I really want to give the Achilles 123s a try. I've heard so many good things about these 'cheaper' tyres, I know a few people who swear by them and the Formula Drift guys love these things. Wheel size: 8.5" x 18 10 x 18 But they're limited in sizes.. Ideally i want 8mm thread depth.. 265/35R18 (8mm tread depth) 255/35R18 (4mm tread dept), I think they come in 8 also 235/40R18 (8mm thread depth) i was thinking 265 square setup. Thoughts? Keep us posted if you go the square set up |
My front wheels are 8.5" x 18 50 offset. I have 1" spacers
Will the 265 fit or be to tight? |
Going 265 all around. If they don't fit, i'll make them fit. I'll machine the spacers and make sure they fit.
|
I reckon you should be able to fit them. I fitted 10's on the front with some persuasion from a fender roller. Because you're running a spacer you should be able to play with that if necessary. Maybe the tyre place might let you dummy fit one from your rears onto the front wheel for a test?
|
Patrick,
I have 1 inch of spacers to play with. I think it should be possible. i had a look at some calculators ect Even if i have to run extra camber (i shouldn't have to) I though of you running 10s at the front, which are 255mm in width. so another 10mm of tyre should be fine. |
I got the 1" spacer on the car and put the rear wheel at the front. it fits.. Has 30mm i think from the suspension and just sticks past the guards. so the 8.5 with a 265 should be okay. If i have to, will machine the spacers. Then again, when the suspension compresses, the wheels camber in more and will tuck in.
Anyway it should manage. A square setup, should be interesting.. |
Originally Posted by Paulyy
(Post 12046018)
I got the 1" spacer on the car and put the rear wheel at the front. it fits.. Has 30mm i think from the suspension and just sticks past the guards. so the 8.5 with a 265 should be okay. If i have to, will machine the spacers. Then again, when the suspension compresses, the wheels camber in more and will tuck in.
Anyway it should manage. A square setup, should be interesting.. |
I have a set of 205/50/17 Achilles on my Mazda 3 GT they are ok. pretty hard compound. Probably completely different than the ones you are refering to but for that car bang for the buck totally worth it.
|
Square all the way, and stiffen up that rear sway bar so the car will have a wonderful oversteering attitude.
>200 treadwear tires make for high lateral Gs. |
Looking forward to seeing pics of your setup.
|
I ran 275 Nittos all round on the Enkei 10's. They fitted easily in the rear and as mentioned with a bit of rolling in the front. I will say that our cars are not all the same. What fits on one doesn't always seem to fit on another.
|
265 Square setup.
We machined the front spacers 2mm. clearance is good.. here's some quick photos. http://i107.photobucket.com/albums/m...64019302_n.jpg http://i107.photobucket.com/albums/m...75008579_n.jpg |
Damn.. That looks sweet Pauly!
|
wheels look great Pauly. Be interesting to see how they effect the handling. Mine came squared off and pushed something shocking, but tyres were crap and mismatched front to rear
|
All times are GMT -3. The time now is 05:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands