Ball joint repair kit
#1
Instructor
Thread Starter
Join Date: Jan 2012
Location: ITALY
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Ball joint repair kit
Hi guys,
due to an hard bump coming from the front suspension probably i'll have to replace the front arms ball joints.
I saw that there are two different kits, one with bronze bushing and one with plastic bushing: the second one is cheaper but is it good anyway or not?
due to an hard bump coming from the front suspension probably i'll have to replace the front arms ball joints.
I saw that there are two different kits, one with bronze bushing and one with plastic bushing: the second one is cheaper but is it good anyway or not?
#5
Rennlist Member
First check if your centrol arms are rebuildable, recently one of my balljoints snaped, because i had the front too low and didnt have geometry connecting pins, i bought a rebuild kit, and then i found out that my control arm balljoints were not rebuildable, i had somekind of aftermarket controll arms with compressed joints, had to buy two new control arms, btw my car is 89 turbo...
#6
Carl, I might be wrong but if your '89 control arms are the same as my '90 then it's rebuildable. Rennbay and I think Paragon (probably other vendors as well) sell the rebuild kit.
#7
Rennlist Member
There were two kinds of a arms, the one on the left in the picture is rebuildable, one on the right is not