How much lag can you deal with?
 

Just a bit of fun, How much turbo lag can you deal with on your 951?

all at 1bar / 14.5 psi.

My car is a dedicated track car so not really driven under 3500 rpm.

I am always racing so the RPM's are always at 6500

I think it depends on the power output youre looking for.

I'd say full boost at 4000-4300 rpm is acceptable if you're making 450-500hp, but totally unacceptable to make 300hp.

Don't mind a little lag, as long as it pulls hard to redline

No Lag and big HP. That is what I like :)

+1

with a 8k rpm limit i think 4 is ok

I voted based on 25psi. :)

With a 2.5 sub 3500. Stroked engine sub 4k

Lighter bottom end, dry sump & solid lifters? Geez a lot of rpm

dont really need solid lifter for 8k rpm but will probably use solid liftes. i will probably only go to around 7800

On 2.5 and leaking headers I had 1 bar at 3600 and now 2.8 is about 3200. As the weather cools I expect sub 3000 for 1 bar.

my 60-1 hits one bar at around 4100

Little laggier than I'd like, at least I get decent gas mileage...

4000 with all of my builds