FS: TEC3r, Roller, Lindsey exhaust etc
01-01-2012, 04:20 AM
#47
Rennlist Member
Thread Starter
Join Date: May 2005
Location: Buffalo, NY
Posts: 2,085
Likes: 0
Received 0 Likes
on
0 Posts
I have the disc still and it does have some life left in it but the pressure plate has a crack in the diaphragm and im working on having KEP warranty it.
scph the stuff that is left the roller, the engine, trans, wheels and pretty much most of the parts to make a full car. Although it will need a DME and a few wires resoldered on the harness I have. It also needs a turbo and exhaust. I still have the stock IC laying around and all the a/c parts that were taken off. The interior is 95% complete its missing the hatch carpet and the driver side hvac vent.
scph the stuff that is left the roller, the engine, trans, wheels and pretty much most of the parts to make a full car. Although it will need a DME and a few wires resoldered on the harness I have. It also needs a turbo and exhaust. I still have the stock IC laying around and all the a/c parts that were taken off. The interior is 95% complete its missing the hatch carpet and the driver side hvac vent.
