Do 968 M030 rear rotors fit a 951?
#1
Rennlist Member
Thread Starter
Join Date: Oct 2007
Location: Racking up air miles....
Posts: 3,663
Likes: 0
Received 557 Likes
on
246 Posts
Do 968 M030 rear rotors fit a 951?
I've ordered the 928 GTS / 993tt rotors for the front, but I'm wondering what the best option for the rear is. I'll be keeping my non "S" rear calipers & wondered if the 968 M030 cross drilled rotors would work.
I know that the front M030 uses different hubs/spindles but I'm unsure if there is the same difference in back.
Any information would be appreciated.
I know that the front M030 uses different hubs/spindles but I'm unsure if there is the same difference in back.
Any information would be appreciated.
#4
#5
Addict
Rennlist Member
Rennlist Member
Actually the 944/951 M303 rotors aren't drilled, but the 968 M030 rotors are.
And, before they were the 968 M030 rotors, the drilled rears were turbo cup rotors.
And, before they were the 968 M030 rotors, the drilled rears were turbo cup rotors.
#6
Rennlist Member
Sorry, I should've clarified that they are the same dimensionally in terms of bolting them on and working.