Ebay Auction to a couple things of mine
02-05-2009, 09:34 AM
#1
Part of the IN Crowd
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Feb 2002
Location: Simpsonville, SC
Posts: 4,641
Likes: 0
Received 0 Likes
on
0 Posts
Ebay Auction to a couple things of mine
I have two auctions going currently some Turbo parts I thought some of you would be interested in
Alternator currently $20
Speed Force MAF with PSC1 $300
I also have a KLR, and a set of APE stage II's that will be going up tonight. KLR will start at $90 and chips will start at $85.
Let me know if there are any questions.
Alternator currently $20
Speed Force MAF with PSC1 $300
I also have a KLR, and a set of APE stage II's that will be going up tonight. KLR will start at $90 and chips will start at $85.
Let me know if there are any questions.
Last edited by Kool; 02-06-2009 at 09:19 AM.
02-05-2009, 09:53 AM
#2
Team Owner
Is this a Stage 1 draw through? What size is the tubing that comes with it?
02-05-2009, 09:57 AM
#3
Part of the IN Crowd
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Feb 2002
Location: Simpsonville, SC
Posts: 4,641
Likes: 0
Received 0 Likes
on
0 Posts
Yes it is a draw through. The piping is 3" ID I have a reducer to go to my 2.75" compressor housing. I will measure this afternoon to be sure.
02-05-2009, 08:00 PM
#4
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
I have two auctions going currently some Turbo parts I thought some of you would be interested in
Alternator currently $20
Speed Force MAF with PSC1
I also have a KLR, and a set of APE stage II's that will be going up tonight. KLR will start at $90 and chips will start at $85.
Let me know if there are any questions.
Alternator currently $20
Speed Force MAF with PSC1
I also have a KLR, and a set of APE stage II's that will be going up tonight. KLR will start at $90 and chips will start at $85.
Let me know if there are any questions.
02-06-2009, 10:14 AM
#7
Part of the IN Crowd
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Feb 2002
Location: Simpsonville, SC
Posts: 4,641
Likes: 0
Received 0 Likes
on
0 Posts
Yes
Instead of the three ***** you tune via a laptop adjusting values in tables using Split Seconds R4 software.
http://www.splitsec.com/products/psc1/PSC1004.htm
Instead of the three ***** you tune via a laptop adjusting values in tables using Split Seconds R4 software.
http://www.splitsec.com/products/psc1/PSC1004.htm