Interest in a New Splitter?: UPDATED!
#106
Rennlist Member
Join Date: Feb 2003
Location: Chicago
Posts: 3,526
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=CPR;5786344]Then what would I spend MY money on? Beer and hookers?QUOTE]
+1
I'm in on the cheap hookers and beer.
uh, sorry. I got excited... What were we talking about?? Oh yeah, the new spoiler looks great!!
+1
I'm in on the cheap hookers and beer.
uh, sorry. I got excited... What were we talking about?? Oh yeah, the new spoiler looks great!!
#108
Race Director
Thread Starter
Thanks for all the kind words. Here are a few more pics...one from the opposite side and one from above to get an idea of the protrusion. Keep in mind this was just the mock-up, the final product is a much better fit and finish.
Attachment 303321
FAT LIP= THIN AIR
Attachment 303322
Attachment 303321
FAT LIP= THIN AIR
Attachment 303322
Last edited by CPR; 11-06-2008 at 10:33 AM.
#110
Rennlist Member
My new 951 will be here soon. Id take one when it gets here, should be about the time you finish the first batch.
#112
Race Director
Thread Starter
Thanks E...V-I is the streetable version. Easy bolt-up replacement for the entire batwing with the incorporation of the splitter. It uses all the factory holes and can be installed in about 15 minutes AND @ a 1/4" thick at the tip and rails it gives you another 1.25-1.5 inches of clearance when compared to others. The V-II is the more aggressive "track" version sporting a longer nose, raised flanks, pronounced corners and fully adjustable Stainless Steel pivoted support arms.
It all started with a PM to you
It all started with a PM to you
#119
Race Director
Thread Starter
#120
Drifting
Great work CPR. I'm really curious about the track version as well.
Keep in mind that PCA club racing stock class rules (which a lot of us run under andI guess would be your prime target for the track version) have a 1" limitation:
"Spoilers and bumpers/air dams are free providing they do not exceed ... maximum factory body length by more than 1 inch..."
So, if the race splitter extends more than 1" beyond the most forward point of the front bumper cover, then technically it is illegal for stock classes.
Keep in mind that PCA club racing stock class rules (which a lot of us run under andI guess would be your prime target for the track version) have a 1" limitation:
"Spoilers and bumpers/air dams are free providing they do not exceed ... maximum factory body length by more than 1 inch..."
So, if the race splitter extends more than 1" beyond the most forward point of the front bumper cover, then technically it is illegal for stock classes.