Wierd clicking.
08-21-2007, 01:38 AM
#16
Advanced
Thread Starter
Join Date: Oct 2006
Location: Columbus, Indiana
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Alright, gonna try to repack the CV joints. But seeing as how Ive never done this before, any tips/places i can find instructions or anything like that at all? Thanks a lot.
-Rob
-Rob
08-21-2007, 02:05 AM
#17
Burning Brakes
Join Date: Oct 2006
Location: San Diego (miramar), CA
Posts: 804
Likes: 0
Received 0 Likes
on
0 Posts
http://clarks-garage.com/shop-manual/susp-01.htm
It took me about 1 hour on each axle. I would try to clean out the cheesehead bolt with some degreaser before you start. If you strip one of those bolts, your in a world of trouble.
Toughest part for me was packing the CV joint with new grease. Very messy job for me.
It took me about 1 hour on each axle. I would try to clean out the cheesehead bolt with some degreaser before you start. If you strip one of those bolts, your in a world of trouble.
Toughest part for me was packing the CV joint with new grease. Very messy job for me.