3L components.
#1
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Thread Starter
3L components.
Over the years, I have been collecting 3L parts, always thinking I will build another 3L 951 or 968. Having "been there, done that" I don't think I need all of the parts I have. Some of these blocks have been in storage for the past 12-15 years, yet to be used.
I have 4 or 5 3L blocks (good cyl walls), a few 2.7L heads, and of course the 3L cranks.
If you have been toying with the idea of building a 3L turbo, and you need the complete parts list, drop me an email. I do not want to sell individual parts, just a complete 3L kit...
So you have an idea of the cost, on average a 3L block cost $1200-1500, same for a 3L crank. A complete 2.7L depends on how lucky you are, I wouldn't sell one for less than $2K.
Edit:
- These are bare blocks, no pistons, no rods....
- One block has Mahle 8V turbo pistons - sale pending
- Head work is optiona. I can also provide rods, turbo, and 3L engine management.
I have 4 or 5 3L blocks (good cyl walls), a few 2.7L heads, and of course the 3L cranks.
If you have been toying with the idea of building a 3L turbo, and you need the complete parts list, drop me an email. I do not want to sell individual parts, just a complete 3L kit...
So you have an idea of the cost, on average a 3L block cost $1200-1500, same for a 3L crank. A complete 2.7L depends on how lucky you are, I wouldn't sell one for less than $2K.
Edit:
- These are bare blocks, no pistons, no rods....
- One block has Mahle 8V turbo pistons - sale pending
- Head work is optiona. I can also provide rods, turbo, and 3L engine management.
Last edited by fast951; 02-18-2007 at 08:08 PM.