High quality headers suggestions
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
High quality headers suggestions
I'm looking for thoughts on builders for high quality headers for my 968 turbo. I'm open to all suggestions. Thanks in advance.
#2
Truthfully... I think you are better off going to a custom builder for headers. The "tried and true" vendors that offer headers leave a good bit to be desired, in my experience (and I have a LOT of it).
If you want to try and make some SFR Stage II headers work, let me know, I have a 321 SS and ceramic coated set sitting on the shelf that I'd like to get rid of. They fit a 2.5 liter head fine but your application may vary...
If you want to try and make some SFR Stage II headers work, let me know, I have a 321 SS and ceramic coated set sitting on the shelf that I'd like to get rid of. They fit a 2.5 liter head fine but your application may vary...
#5
Addict
Rennlist Member
Rennlist Member
Thread Starter
Excellent suggestions, though I suspect we're into cubic dollars. Have you used these guys to make a set of race headers? I've been very frustrated with vendors involved with the 944 turbo world but I know I'm not alone.
#6
Lindsey's 1 piece headers are nice but the flange surfaces were warped enough for them not to seal against the gaskets. I took them to a local shop and had the flanges ground flat for about $40 and ran a drill though the head bolt holes. Perfect sealing and fitment after that.